Related Manuals for Gree livo GEN 3 LIVV12HP230V1A
Summarization of Contents
Introduction and Nomenclature
Superior Design for Superior Performance
Highlights the aesthetic design and performance benefits of Gree's Livv Inverter-driven Mini Split Heat Pumps.
Nomenclature Explained
Details the meaning of each part of the model number LIVV24HP230V1AH.
Safety Precautions and Unit Display
Understanding Safety Alerts
Defines safety signal words (DANGER, WARNING, CAUTION, NOTE) and the safety-alert symbol.
Critical Safety Warnings
Key warnings for safe operation, installation, and maintenance of the unit.
Cautionary Notes for Safe Use
Precautions to avoid minor injury or product/property damage during operation.
Front Panel Display and Icons
Explanation of icons and the LED display on the indoor unit's front panel.
System Functions Overview
Whisper Quiet Operation
Details on the quiet operation of the Livv High-Wall units, starting as low as 26 dB(A).
Multi Fan Speeds
Explanation of the four fan speed options (Low, Medium, High, Turbo) for optimal comfort.
Intelligent Pre-Heating
System guards against cool air in heating mode by delaying indoor fan until warm.
I Feel Mode Functionality
Unit senses room temp at remote controller for personalized comfort and energy savings.
Adjustable Airflow Control
Bi-directional airflow control with adjustable vertical swing louvers for maximum comfort.
Turbo Mode Operation
Achieve desired room temperature quickly by running the unit at ultra-high speeds.
Freeze Guard Protection
Maintains room temperature to prevent water pipes from freezing during cold conditions.
Timer Mode Setting
Programmable timer to turn the unit ON or OFF after a specified time, adjustable 0.5-24 hours.
Mode Button Functions
Unit can be set to five modes: HEAT, COOL, DRY, FAN ONLY, and AUTO.
Sleep Mode Benefits
Automatically adjusts room temperature during sleep for comfort and energy savings.
Energy Savings Mode
Optimizes compressor and fan speeds for energy savings in Cooling/Heating modes.
Self-Diagnosis Feature
Built-in computer scans for errors/malfunctions, displaying fault codes on the unit display.
Power Failure Mode
System parameters are stored and resume last operating mode after power interruption.
Intelligent Defrost Function
Monitors outdoor coil for frost and switches to defrost mode to remove it, saving energy.
Polymeric Air Filter Benefits
Mesh filters save energy by preventing coil clogging; washable, vacuumable, and reusable.
Temperature Display Units (°F/°C)
Remote controller and unit front panel can display temperature in °F or °C.
Privacy Lock Mode
Remote controller lock feature prevents unauthorized access or tampering with settings.
Agency Listings and Certifications
Systems listed with AHRI and ETL certified per UL Standards.
Wireless Remote Controller Operation
Remote Control Buttons Overview
Details on the function of each numbered button on the wireless remote controller.
Display Screen Icons Explained
Explanation of various icons displayed on the remote control's screen.
ON/OFF and Mode Button Functions
How to turn the unit on/off and select operating modes like AUTO, COOL, DRY.
Fan and Swing Button Functions
Controls fan speed adjustment and airflow direction (swing) for various modes.
X-FAN Functionality
Dries the indoor unit fan after operation in COOL/DRY modes to prevent mold.
Turbo, Temperature & Sleep Controls
Functions for quick cooling/heating, temperature adjustment, and sleep mode.
Temp Button Functionality
Allows viewing of indoor/outdoor ambient or set temperatures on the unit display.
WiFi, Light, Clock & Timer Controls
Instructions for WiFi setup, display light, setting clock, and timer functions.
Energy-Saving Function Activation
How to activate energy-saving mode using combined button presses for efficiency.
Timer ON/OFF Operation
Setting specific times for the unit to turn ON or OFF automatically.
Special Functions: Auto Clean, 8°C Heat, Child Lock
Details on auto clean, 8°C heating, child lock, and temperature display switching.
I FEEL Function Explained
Enables the unit to sense room temperature at the remote for precise climate control.
I FEEL Function Usage Notes
Important notes for using the I FEEL function correctly and avoiding inaccurate readings.
Changing Remote Batteries
Instructions for replacing batteries in the wireless remote controller.
Remote Controller Issues
Damaged or Lost Remote Controller
How to operate the unit using the AUX button on the indoor unit if the remote is lost/damaged.
Care and Cleaning Procedures
Front Panel Cleaning
Instructions for cleaning the indoor unit's front panel using mild detergent and water.
Air Filter Cleaning and Maintenance
Guidance on cleaning and reinstalling air filters to maintain performance and longevity.
Troubleshooting Common Issues
System Does Not Restart
Addresses issues where the system fails to restart, often due to a built-in delay.
Unpleasant Odor from Indoor Unit
Explains causes of odors (mold/mildew) and solutions like filter cleaning.
Water Flowing/Gurgling Sounds
Normal sounds from refrigerant pressures equalizing during compressor operation.
Fog or Vapor Emission
Normal phenomenon when cooling extremely humid warm air.
Cracking Sounds During Operation
Normal sounds from parts expanding/contracting during system starts and stops.
System Will Not Run Troubleshooting
Steps for when the unit fails to operate, checking power and remote.
Inadequate Heating or Cooling
Identifies reasons for poor performance, like airflow obstructions or dirty filters.
Water Leakage from Outdoor Unit
Normal condensate water generation in heating/defrost modes for outdoor unit.
Water Leaking into Room Diagnosis
Diagnosing water leaks into the room, checking unit level and drain pipe.
Wireless Remote Controller Malfunction
Troubleshooting for remote issues, checking batteries, range, or replacement.
Unit Will Not Deliver Air
Reasons for no airflow, including heating delay, defrost cycle, or dry mode fan stop.
Moisture on Discharge Air Louvers
Condensation on louvers during prolonged cooling of humid air is normal.
Urgent Service Required Circumstances
Conditions requiring immediate operation stop and service call (unusual sounds, odors, smoke).
Energy Saving Tips
Reduce Room Setpoint at Night
Use Sleep Mode to gradually adjust temperature for energy savings during nighttime.
Curtains and Shades Usage
Block sun in summer, open in winter to manage solar heat gain/loss.
Close Doors for Zone Control
Confine heating/cooling to one room by closing doors for efficiency.
Unit Maintenance for Efficiency
Basic maintenance like hosing off the outdoor unit can improve efficiency.
Rearrange Room for Airflow
Remove furniture obstructing airflow to ensure efficient heating and cooling.
Optimal Temperature Setting (75°F)
Setting temperature to 75°F for optimal performance; 5-degree changes impact energy use.
Lighting Impact on Heat Load
Turn off lights to reduce heat, as AC must work harder to overcome heat generated.
Away Mode and Window Management
Use Auto mode and close windows/curtains when away for efficient return.
Fan Speed Optimization
Use lower fan speeds when possible to save energy, similar to driving a car.
Limited Warranty Statement
Product Registration Information
Information required for product registration to activate warranty services.
Warranty Limitations and Conditions
Exclusions and limitations on implied warranties like merchantability and fitness for purpose.
Warranty Exclusions
List of items and conditions not covered by the GREE limited warranty.
Need help?
Do you have a question about the livo GEN 3 LIVV12HP230V1A and is the answer not in the manual?
Questions and answers