Related Manuals for GBD SC24
Summarization of Contents
Power Supply and Motor Connections
Power Supply and Transformer Wiring
Details connections for power supply and transformer input.
Motor Output Connections
Details connections for motor output terminals.
End Limits Installation Guide
Installation of Closing and Opening Limit Switches
Illustrates the physical installation of end limit sensors.
Accessory and Control Device Wiring
Flashing, Warning, and Stop Connections
Wiring for flashing lights, warning lights, and stop buttons.
Control Devices and Safety Connections
Wiring for control devices and safety inputs.
Photocell Wiring
Standard and Test Photocell Connections
Details standard and test connections for photocell sensors.
Safety Device Wiring
NC and 8K2 Safety Device Connections
Explains connections for NC and 8K2 safety devices.
Additional Safety Device Configurations
Covers additional NC and 8K2 safety device connections.
DIP Switch Configuration Settings
DIP Switch SW1 Default Settings
Configures SW1 settings for various operational modes.
DIP Switch SW4 Default Settings
Configures SW4 settings for additional operational parameters.
Deceleration Trimmer Adjustments
AMP. SLOW Trimmer for Anti-Crushing Sensitivity
Adjusts anti-crushing sensitivity during deceleration.
SLOW Trimmer for Motor Speed during Deceleration
Sets motor speed during deceleration phases.
Normal Movement Trimmer Adjustments
AMP. FORCE Trimmer for Anti-Crushing Sensitivity
Adjusts anti-crushing sensitivity during normal movement.
FORCE Trimmer for Motor Speed during Normal Movement
Sets motor speed during normal movement phases.
Need help?
Do you have a question about the SC24 and is the answer not in the manual?
Questions and answers