Table of Contents
Advertisement
KEEP FOR FUTURE REFERENCE
INSTRUCTIONS
International Version
MODEL NUMBERS: MRT49DC,
P.O. Box 368 – 908 West Main
Laurel, MT USA 59044
MRT4HV11DC, MRT411LDC
phone 800-548-7341
SERIAL NUMBER: ___________
phone 406-628-8231
fax 406-628-8354
(please see serial label and record number here)
MANUAL ROTATOR / TILTER
DC-VOLTAGE
READ ALL INSTRUCTIONS AND WARNINGS
BEFORE OPERATING THIS LIFTER
DESIGNED FOR THE MATERIALS HANDLING PROFESSIONAL
Advertisement
Table of Contents
Related Manuals for WOOD'S POWR-GRIP MRT411LDC
Summarization of Contents
SPECIFICATIONS
Model Identification and Physical Characteristics
Details model numbers, vacuum pad sizes, and pad spread configurations.
Load Capacity and Power Specifications
Outlines load capacity per pad, maximum load, lifter weight, power source, and battery capacity.
Operational Parameters and Safety Standards
Covers tilt, rotation, vacuum pump, gauge, warning lights, and ASME standard compliance.
WARNINGS
General Operational Safety
Emphasizes wearing PPE, operating under approved conditions, and avoiding hazards.
Prohibitions and Integrity Checks
Warns against operating damaged equipment, obscuring labels, or making unauthorized modifications.
OPERATING FEATURES
Lifter Component Overview
Identifies and illustrates the various components of the vacuum lifter.
ASSEMBLY
Initial Setup and Hoisting
Guides through unpacking, suspending, and preparing the lifter for operation.
Pad Frame Configuration
Explains how to adjust the pad frame for different load sizes and configurations.
INTENDED USE
Load Characteristics and Suitability
Specifies load requirements, material properties, surface conditions, and thickness limits.
Operating Environment and Safety Guidelines
Defines environmental restrictions, contamination risks, and CE standards for construction zones.
Lifter Disposal Procedures
Instructions for disposing of the lifter at the end of its service life.
OPERATION
Pre-Operation Procedures
Covers operator training, safety precautions, and essential inspections before use.
Applying and Sealing Vacuum Pads
Details on positioning, sealing pads, and checking vacuum levels on different surfaces.
Lifting and Moving the Load
Procedures for lifting, monitoring vacuum, and moving the load safely.
Load Manipulation: Rotation and Tilt
Instructions for rotating the load edgewise and tilting the load.
Releasing Pads and Post-Operation
Guidance on releasing vacuum pads and storing the lifter.
AFTER USING THE LIFTER
Lifter Storage and Battery Charging
Instructions for storing the lifter and properly charging the battery.
MAINTENANCE
Inspection and Testing Schedules
Defines routine inspection frequencies and required tests for equipment integrity.
Battery and Charger Maintenance
Covers battery testing, recharging, and verifying battery charger functionality.
Vacuum System Component Care
Instructions for maintaining vacuum pads, air filters, and vacuum pump systems.
Vacuum Switch Calibration
Procedures for adjusting the vacuum switch to ensure correct vacuum level monitoring.
REPLACEMENT PARTS LIST
Component Ordering Information
Lists available replacement parts with stock numbers for ordering.
LIMITED WARRANTY
Warranty Terms and Service Claims
Outlines the warranty period, exclusions, and steps for obtaining service or repairs.
Need help?
Do you have a question about the MRT411LDC and is the answer not in the manual?
Questions and answers