Advertisement
Quick Links
Advertisement
Related Manuals for LINDR AS-110 INOX
Summarization of Contents
Introduction and General Safety
Product Introduction and Initial Cautions
Details about the product and initial safety precautions before use.
General Safety Rules and Usage
Essential rules for safe operation, including restrictions and user eligibility.
Electrical Safety Precautions
Guidelines for safe electrical connection, handling, and socket requirements.
Installation, Operation, and Product Information
Installation and Placement Guidelines
Instructions on how to install and position the cooler for optimal ventilation.
Safe Handling During Transport
Critical warning against placing the chiller on its side during transport.
Operating Conditions
Details on ideal environmental conditions for optimal performance.
Product Testing and Warranty
Information regarding product testing and warranty terms and conditions.
Beverage Connection and Thermostat
Filling the Water Tank
Instructions for filling the plastic tank with water up to the overflow.
Connecting Beverage Lines
Steps to connect the cooling machine to dispense heads and recommendations.
Thermostat Placement
Identifies the location of the thermostat on Model AS and Model CWP.
Temperature Setting and Fittings
Beverage Temperature Control
How to set the thermostat for optimal beverage temperature.
Connecting and Securing Tubes
Instructions on how to properly insert tubes into fittings.
Safe Tube Disconnection
Steps for safely disconnecting tubes from fittings without damage.
Maintenance and Cleaning Procedures
Maintenance Service Responsibilities
Differentiates maintenance responsibilities for operating and professional staff.
General Machine Cleaning
Safety and procedure for cleaning the machine, including condenser and coil.
Condenser Fan Cover Removal
Steps to remove the fan cover for condenser cleaning.
Periodic Checks and Sanitization
Cleaning the Condenser
Detailed steps for cleaning the condenser by removing the fan cover.
Periodic System Checks
List of essential checks to ensure proper operation and maintenance.
Sanitizing Dispensing Components
Reminder to sanitize dispensing taps and keg couplers.
Technical and Environmental Information
Special Maintenance for Qualified Personnel
Information exclusively for qualified individuals regarding special maintenance.
Electrical Connection Requirements
Specifications and regulations for connecting the machine to power.
Electricity Risk Management
Details on how electrical risks are mitigated through design.
Technical Specifications and Labels
Information on the location of technical specifications and labels.
Environmental Protection and Waste Sorting
Guidelines for product disposal and waste management.
Connection Diagrams
AS-40 CO2/N2 Pressurizing Setup
Diagram and component list for connecting the AS-40 model.
AS-80 Dispense Tower Setup
Diagram and component list for connecting the AS-80 with a dispense tower.
CWP-200 Connection Diagram
CWP-200 Dispense Tower Setup
Diagram and component list for connecting the CWP-200 with a dispense tower.
Sanitation Procedures
Routine Maintenance and Cleaning
Instructions for rinsing beverage tubes and checking capacitor cleanliness.
Cleaning with Water
Procedure for cleaning the system using a cleaning adapter and water.
Chemical Sanitization
Detailed steps for chemical sanitization using a sanitizing bottle and solution.
Tap Compensator Disassembly and Sanitation
Compensator Disassembly from Tap
Steps to unscrew and remove the dispense tap and compensator.
Compensator Removal
Instructions for pulling out the compensator from the dispensing tap body.
Reassembly and Sanitation
Steps for reassembling the tap and performing sanitation.
Troubleshooting and Parts
Troubleshooting Common Issues
Identifies common problems like noise or non-functionality and their solutions.
Ordering Replacement Parts
Information on how to order replacement parts and required details.
Product Specifications Table
Cooling Specifications Overview
Table detailing cooling power, capacity, and dimensions for various models.
Additional Product Specifications
Further Cooling and Dimension Data
Table providing additional technical data for specific product models.
Need help?
Do you have a question about the AS-110 INOX and is the answer not in the manual?
Questions and answers