Advertisement
Quick Links
Rubinetteria
Taps and fittings
Ro binetterie
A rmaturen
G rifería
aura
young
morphosis
Manuale d'installazione
CONSERVARE CON CURA
Installation manual
KEEP CAREFULLY
Notice d'installation
GARDEZ SOIGNEUSEMENT
Installations Anweisung
SORGFÄLTIG AUFBEWAHREN
Manual de instalación
CONSERVAR CON CUIDADO
êÛÍÓ‚Ó‰ÒÚ‚Ó ÔÓ ÛÒÚ‡ÌÓ‚ÍÂ
ïêÄçàíú ÅÖêÖÜçé
Advertisement
Related Manuals for Jacuzzi Young
Summarization of Contents
Initial Component Fitting
Unscrew, Attach Cylinder, and Secure
Remove headless screw, slide out cylinder, tighten nuts, and secure parallel to edge.
Tap Installation
Install Taps and Associated Components
Install taps, components, and secure them with ring nuts.
Housing and Cover Assembly
Apply and Fasten Covers
Apply covers and fasten them from above with ring nuts.
Assemble Shower Support
Assemble shower support with gaskets and apply the cover.
Attach Final Gasket and Nut
Apply another gasket and attach it with the indicated nut.
Shower Hose Installation
Assemble Shower Hose Components
Take shower hose and insert specified components in order.
Connect Hose to Cross Cylinder
Fasten flexible hose to cross cylinder and run it through the support.
Connect Shower Hoses Together
Connect the shower hose to the previously installed hose.
Internal Tube and Component Fitting
Screw in Threaded Tube R
Screw the threaded tube R into the shower support until it seats.
Fit Washer Q and Spring S
Tighten washer Q onto tube P and place on spring S inside tube R.
Install Spacer, Ring Nut, and Button
Place spacer M, screw ring nut L, and screw push button K.
Shower Head and Hose Connections
Connect Shower Head
Run flexible hose under edge and screw in shower head with gasket.
Install Water Supply Outlet
Press water supply outlet into place and fasten from behind.
Connect Flexible Hoses
Insert gasket, screw hose to tap and then to the cross cylinder.
Final Assembly and Alignment
Align Covers with Level
Align the covers using a level for proper placement.
Attach Shower Head Support
Attach the shower head support to the edge with ring nuts and screws.
Install and Secure Tap Pins
Install pins on tap shafts, turn taps to closed, and fasten with hex screws.
Knob Installation for Models
Install Aura Model Knobs and Plugs
Install Aura model knobs and plugs, ensuring parallelism and correct orientation.
Install Young Model Knobs and Pin
Install Young model knobs on shafts and screw on the chromed pin.
Install Morphosis Model Knobs and Pins
Install Morphosis model knobs on shafts and screw on chromed pins.
Final Connections and Operation
Make Equipotential Connection
Make the equipotential connection for safety and proper grounding.
Diverter Knob Operation Guide
Guide to using the diverter knob to switch water flow between outlets.
Showerhead Removal and Replacement
Instructions for removing and replacing the showerhead from its support.
Need help?
Do you have a question about the Young and is the answer not in the manual?
Questions and answers