Related Manuals for Leister UNIPLAN 500
Summarization of Contents
Application and Safety
Intended and Improper Use
Defines the correct and incorrect applications of the hot-air welder.
Safety Instructions and Power Supply
Crucial safety guidelines and requirements for electrical power supply.
Technical Data and Transport
Device Specifications
Detailed technical specifications for UNIPLAN 300 and 500 models.
Safe Transport Procedures
Guidelines for safely packing and transporting the hot-air welder.
Your UNIPLAN 300 / 500
Identification and Scope of Delivery
How to identify your device and what is included in the standard package.
Device Components Overview
Identification of Parts
Visual identification and labeling of all major components of the welder.
UNIPLAN 500 Control Panel Operation
Control Panel Layout and Function Keys
Overview of the control panel, including status displays and function keys.
UNIPLAN 500 Status and Warnings
LED Status Indicators
Explains the meaning of LED lights for heating and drive functions.
Warning and Error Message Indication
How warnings and errors are displayed, including combined status.
UNIPLAN 500 Display Symbols
Status Display Areas
Interpretation of symbols in the left and right status display areas.
Function and Working Display Symbols
Meanings of symbols shown in the function and working displays.
UNIPLAN 500 Display Symbol Details
Operation and Temperature Symbols
Further explanation of symbols for operation modes and temperature status.
UNIPLAN 500 Menu and Recipes
Menu Selection Symbols and Setup Navigation
Symbols for menu selection and navigating the setup menu.
Creating and Saving Recipes
Step-by-step guide to creating, naming, and saving custom welding recipes.
UNIPLAN 500 Recipe Management
Modifying, Selecting, and Naming Recipes
Procedures for editing, choosing, and naming welding recipes.
UNIPLAN 500 Settings Modes
Basic, Advanced, and Eco Mode
Overview of different setting modes and the Eco Mode for standby.
UNIPLAN 500 Advanced Mode Features
Duty, General, and Warning Information
Accessing duty cycle, general device info, and warning messages.
Machine Setup and Configuration
Adjusting units, LCD contrast, and backlight settings.
UNIPLAN 500 Data Display and Reset
Viewing Current Values and Set Values
How to display current operating data and setpoints.
Resetting Defaults and Day Distance
Procedures for resetting to factory settings and viewing day distance.
UNIPLAN 500 Commissioning and Operation
Device Readiness and Nozzle Adjustment
Pre-operation checks and how to adjust the welding nozzle.
Key Lock and Resetting Day Distance
Using the key lock and resetting the day distance counter.
UNIPLAN 500 Setup Adjustments
Guide Bar, Weight, and Overlap Guide Installation
Instructions for installing guide bar, auxiliary weights, and adjusting overlap guide.
Starting Switch and Round Belt Adjustment
How to adjust the starting switch and round belt tension.
Starting and Setting Parameters
Device Startup Procedure
Steps to power on the device and initial display.
Welding Parameter Configuration
How to select and adjust welding parameters like speed and temperature.
UNIPLAN 500 Welding Sequence
Device Positioning and Preparation
Guidance on positioning the welder and preparing for welding.
Commencing and Guiding the Weld
Steps to start welding and guide the device along the seam.
UNIPLAN 500 Welding Process Control
Monitoring Parameters and Completing Weld
Checking parameters during welding and steps to finish the weld.
Device Shutdown and Cooling Down
Procedures for turning off the device and the cool-down process.
UNIPLAN 500 Warning and Error Messages
Error Codes and Troubleshooting Solutions
Detailed list of error codes, their descriptions, and solutions.
UNIPLAN 300 Control Panel Features
Panel Layout, Symbols, and Heating LEDs
Overview of the UNIPLAN 300 control panel, its symbols, and heating status lights.
UNIPLAN 300 Drive and Units
Drive Status LEDs and Error Indication
Explains drive status LEDs and combined heating/drive error signals.
Setting Parameter Units
Instructions for changing temperature and speed units.
UNIPLAN 300 Commissioning and Operation
Pre-Operation Checks and Adjustments
Readiness checks and references for nozzle, guide, switch, and belt adjustments.
Starting the Device and Setting Parameters
Steps for starting the UNIPLAN 300 and configuring welding parameters.
UNIPLAN 300 Welding Operations
Parameter Adjustment and Welding Sequence
Setting welding parameters and the steps for welding preparation and commencement.
UNIPLAN 300 Welding Process and Shutdown
Parameter Monitoring and Finishing Weld
Checking parameters during welding and completing the process.
Turning Off and Cleaning the Device
Procedures for shutting down the device and cleaning the welding nozzle.
UNIPLAN 300 Warnings and Maintenance
Error Messages and Troubleshooting
Lists error codes, descriptions, and solutions for the UNIPLAN 300.
Maintenance Interval Notifications
Explains displayed messages indicating when device maintenance is required.
Frequently Asked Questions and Documents
Common Operational Questions and Solutions
Addresses frequent user queries regarding machine behavior and results.
Reference to Safety Instructions
Points to the essential safety instructions document for the welder.
Declaration of Conformity
EU Directives and Harmonised Standards Compliance
Lists the EU directives and standards the product conforms to.
Warranty and Service Information
Warranty Terms and Exclusions
Details the warranty coverage, limitations, and exclusions for the device.
Sales and Service Center Contact
Provides contact information for sales and service support.
Need help?
Do you have a question about the UNIPLAN 500 and is the answer not in the manual?
Questions and answers