Related Manuals for Unical XC-K oil 100
Summarization of Contents
General Information
Symbols Used in Manual
Explains warning symbols used in the manual.
Appropriate Appliance Use
Defines the intended use and safety precautions for the appliance.
Water Treatment Guidance
Provides guidance on water treatment and exchanger maintenance.
System Manager Information
Outlines information to be provided to the system manager.
Safety Precautions
General Safety Warnings
Critical safety precautions for installation, maintenance, and operation.
Gas-Fired Appliance Warnings
Specific warnings and procedures for gas-fired appliances.
Smell of Gas Procedures
Step-by-step guidelines to follow if a gas smell is detected.
Technical Data and Features
Technical Data Plate Explanation
Explains the technical data plate and its components.
Main Components Identification
Identifies and describes the main components of the XC-K oil boilers.
Smoke Turbulator Functionality
Explains the function and installation of smoke turbulators.
Boiler Dimensions and Operating Data
XC-K Oil 100 Dimensions
Details dimensions and connections for the XC-K oil 100 model.
XC-K Oil 150-400 Dimensions
Provides dimensions and connections for XC-K oil 150 to 400 models.
XC-K Oil 500-1550 Dimensions
Details dimensions and connections for XC-K oil 500 to 1550 models.
Boiler Operating Data
Presents key operating data for XC-K oil boilers.
ErP Directive Technical Data
Oil Fired Boiler Data
Lists technical data for oil-fired XC-K boilers per ErP directive.
Gas Fired Boiler Data
Lists technical data for gas-fired XC-K boilers per ErP directive.
Installation Procedures
General Installation Warnings
Provides critical warnings for boiler installation.
Installation Standards and Regulations
Outlines standards and regulations for boiler installation.
Boiler Handling and Positioning
Guidelines for safe handling and placement of the boiler.
Burner Installation
Steps for correctly installing the burner onto the boiler door.
Flue Exhaust Pipe Connection
Guidance on connecting the flue exhaust pipe according to standards.
Condensation Draining
Explains condensation formation and drainage during commissioning.
System Connections and Electrical
Boiler to System Connection
Instructions for connecting the boiler to the heating system.
Gas and Oil Connections
Safety and connection instructions for gas and oil supply.
Electrical Connections
General safety warnings and procedures for electrical connections.
Control Panel Operations
Modulating Master Panel (37892)
Details the Modulating Master Panel Board (code 37892).
Programming Heating Controllers (Single)
Instructions for programming heating controllers for single boilers.
Heating Controller Parameters (E8.5064)
Lists programmable parameters for the heating controller (installation section).
Cascade System Control
Modulating Cascade Panel (37900)
Details the Modulating Cascade Panel Board (code 37900).
Cascade System Connection (37892/37900)
System connection for boilers in cascade with panel boards 37892 and 37900.
Dual-Stage Master Panel (38778)
Details the Dual-Stage Master Panel Board (code 38778).
Cascade System Connections (38778/37901)
System connection for boilers in cascade with panel boards 38778 and 37901.
Commissioning and Maintenance
Preliminary Commissioning Checks
Essential checks before boiler commissioning.
Boiler On/Off Procedures
Instructions for boiler operation and shutdown.
System Manager Operation Info
Key information for the system manager regarding boiler use.
Burner Adjustment Procedure
Instructions for adjusting the burner by authorized personnel.
Inspections and Maintenance Overview
General guidelines for inspections and maintenance.
Boiler Body Maintenance
Procedures for cleaning and maintaining the boiler body.
Burner Maintenance
Maintenance procedures for the burner.
Yearly Inspection Components
List of components to check during annual inspection.
Need help?
Do you have a question about the XC-K oil 100 and is the answer not in the manual?
Questions and answers