Table of Contents
Advertisement
Parts on the rear panel (TDP-S20/S21)
(6)
MONITOR
COMPUTER 2 IN
(
Y/P
(15)
Name
(1) Infrared remote sensor
(2) S-VIDEO terminal
(3) AUDIO (L/R) terminal
(4) CONTROL terminal
(5) AUDIO OUT terminal
(6) MONITOR terminal
(7) AC IN socket
(8) Main power switch
(9) Speaker
( 10) Antitheft lock hole
(11) VIDEO terminal
(12) AUDIO (L/R) terminal
(13) COMPUTER 1 terminal
(14) AUDIO IN terminal
(15) COMPUTER 2 terminal
Note
• Although this owner's manual abbreviates component video signals as Y/P
product also supports signals from video equipment marked "Y/C
(5)
(3)
(4)
CONTROL
AUDIO OUT
COMPUTER 1 IN
/P
)
AUDIO IN
(
Y/P
/P
)
B
R
B
R
(14)
(13)
(12)
: Main Function
: Senses commands from the remote control.
: Input S video signals from video equipment.
: Input audio signals from video equipment.
: When operating the projector via a computer, connect
this to the controlling computer's RS-232C port.
: Outputs audio signals.
: Connect to a computer display, etc.
: Connect the supplied power cord here.
: AC power line ON (standby)/OFF.
: Outputs audio sound.
: Attach a safety cable or any other antitheft device.
: Input video signals from video equipment.
: Input audio signals from video equipment.
: Input RGB signal from a computer or other source, or a
component video signal (Y/P
equipment.
: Input audio signals from a computer or video
equipment with a component video signal output
terminal.
: Input RGB signal from a computer or other source, or a
component video signal (Y/P
equipment.
For TDP-S21, use exclusively for document camera
connection.
(2) (1)
S-VIDEO
R
L
VIDEO
(11)
(10)
(9)
(7)
(8)
/P
) from video
B
R
/P
) from video
B
R
/P
B
/C
."
B
R
, the
R
4
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
