ASCOM IP-DECT - BROCHURE 1 Brochure page 4

4 Ascom IP-DEcT
The building blocks of the system:
IP-DEcT base stations
IP-DEcT gateways
Ims for IP-DEcT
VoIP gateways, digital & analogue
Existing base stations
Older handsets such as DT288,
DT290, DT368, DT570, TH688 and
9d23 as well as Ascom's latest
handsets, DT292, OfficeT, DT590,
OfficeM and 9d24, are compatible
with our IP-DECT solution. This
backward compatibility with older
handsets means that any
DCT1800-GAP, MD Evolution,
BusinessPhone or MD110 system,
running DECT GAP and/or CAP can
be replaced by IP-DECT.
Yesterday and tomorrow are both taken care of
With Ascom, legacy systems are not an issue. Traditional DECT base stations
can readily co-exist with IP-DECT base stations while enjoying full support
for roaming and handover. By using the IP-DECT gateway, you can reuse
and utilize your investment in DECT base stations and migrate to VoIP with-
out fuss and without compromising your security.
However, if you are not running a DECT system today you can use the
Ascom IP-DECT system together with your IP PBX choosing SIP or H.323
protocols to build the network – unless, of course, you have a large system
in mind where, for example, LAN connectivities are far apart. In which case
you could use a mix of IP-DECT base stations and IP-DECT gateways together
with traditional DECT base stations (cable distance up to 1,5 km instead
of 100 m for Ethernet).
Smooth migration to the VoIP world
The Ascom VoIP gateway is a real time- and money-saver. Because it con-
nects with an already installed PBX, there's no need for a costly upgrade.
And for added convenience, it supports a wide number of PBX supplemen-
tary services, including call transfer, call forwarding and caller ID. As a bonus,
the redundancy planning feature more or less eliminates downtime.
Ascom IP-DEcT soluTIon
Legasy Base stations
IP-DEcT Gateway
Local Area Network
IP-PBX 3rd party
Analogue PBX
Seamles handover
IP-DEcT Base stations
Legacy PBXs
FXo
Unite suite
Ims for IP-DEcT
VoIP Gateway