Inserting And Charging The Battery Cells In The Handset - ASCOM EURIT 133 User Manual

Setting up the telephone and putting it into service
Inserting and charging the
battery cells in the handset
Inserting the battery cells
1. Remove the battery compartment
cover by pressing it slightly and
sliding it downwards.
2. Insert the 3 battery cells into the
battery compartment (as shown).
Make sure the polarity is correct.
Note:
If the battery cells are inserted incorrectly,
the handset will not function.
Do not use a mix of different types of bat-
teries.
3. Slide the battery compartment cover
back until it clicks into place.
4. Switch the handset on by pressing
the connect key.
8