Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Sensus OMNI T2
Summarization of Contents
Introduction
Specifications
Details input power, output signal, wiring, contact closure duration, duty cycle, and lightning protection.
OMNI Installation
Required Tools
Lists hex head ball end drivers, seal screw tool, and various open/box wrenches needed for installation.
Installation Instructions
Provides guidelines for meter installation, including pipe diameter requirements, valve placement, and accuracy testing.
Signal Connections
Description
Explains the solid-state electronics and programmable outputs of OMNI registers.
Features
Highlights programmable totalizer registration, digital pulse signal, AMR digits, and sealed register for pit environments.
Application
States OMNI registers are for accurate water totalization in non-explosive atmospheres, including pit settings.
Electrical Connections
Details AMR and pulse output wires, lengths, splicing, and maximum pulse cable length.
Measuring Chamber
Tools Required
Lists hex head ball end drivers, seal screw tool, and various open/box wrenches for measuring chamber service.
CAUTION
Warns to turn off and relieve pressure before loosening or removing chamber bolts.
Remove the Measuring Chamber
Details steps for removing the measuring chamber, including loosening bolts, prying the cover, and removing the chamber.
Disassemble the Measuring Chamber
Provides an exploded view and parts list for disassembling the C2/F2/T2 measuring chamber.
Exchange the Measuring Insert
Guides on preparing the body, lubricating O-ring, fitting the insert, and tightening screws for replacement.
Need help?
Do you have a question about the OMNI T2 and is the answer not in the manual?
Questions and answers