Table of Contents
Advertisement
Electrical Safety Tester
GPT/GPI-700A Series
USER MANUAL
GW INSTEK PART NO. 82PI-74500MG1
ISO-9001 CERTIFIED MANUFACTURER
This manual contains proprietary information, which is protected
by copyrights. All rights are reserved. No part of this manual may
be photocopied, reproduced or translated to another language
without prior written consent of Good Will company.
The information in this manual was correct at the time of printing.
However, Good Will continues to improve products and reserves
the rights to change specification, equipment, and maintenance
procedures at any time without notice.
Good Will Instrument Co., Ltd.
No. 7-1, Jhongsing Rd., Tucheng City, Taipei County 236, Taiwan.
Advertisement
Table of Contents
Related Manuals for GW Instek GPI-725A
Summarization of Contents
SAFETY TERMS AND SYMBOLS
Warning Statements
Identifies conditions or practices that could result in injury or loss of life.
Caution Statements
Identifies conditions or practices that could result in damage to product or property.
Safety Symbols
Illustrates and defines key safety symbols used in the manual and on the product.
PRODUCT INTRODUCTION
Description
Details the purpose and compliance of the GPT/GPI-700A series Electrical Safety Testers (EST).
Features
Lists and describes various features of the GPT/GPI-700A series testers.
SPECIFICATION
AC Hi-Pot Specifications
Details voltage, current, and accuracy for AC Hi-Pot testing.
DC Hi-Pot Specifications
Details voltage, current, and accuracy for DC Hi-Pot testing for specific models.
Insulation Resistance Specifications
Specifies parameters for Insulation Resistance tests for specific models.
Ground Bond Specifications
Details specifications for Ground Bond tests for the GPI-745A model.
Continuity Check Specifications
Specifies parameters for Continuity Check tests for specific models.
Ramp Time and Test Time
Outlines the time parameters for various test types.
ARC Detect
Details the levels for ARC detection.
Storage
Specifies the storage capacity for test groups and steps.
Interface
Details available interfaces like RS-232 and GPIB.
PLC Control
Specifies the PLC control interface details.
Scanner Interface
Details the scanner interface connector.
Real Plate Output
Describes the real plate output for Hi-pot and GB terminals.
General
Provides general information on power source, environment, and accessories.
PRECAUTIONS BEFORE OPERATION
Unpacking the instrument
Instructions for unpacking and inspecting the instrument for damage.
Safety Notice
Covers working place safety, line voltage checks, and operator precautions.
Secure Testing
Guidelines for safe testing practices, including earth lead connection and probe handling.
Environment
Specifies recommended ambient temperature range and environmental conditions.
PANEL INTRODUCTION
Front Panel
Details and labels the various controls and indicators on the front panel.
Rear Panel
Details and labels the connectors and settings on the rear panel.
OPERATION METHOD
Main Display LCD
Explains the main display screen layout, parameters, and status indicators.
Prepare the EST for Use
Step-by-step guide to prepare the Electrical Safety Tester for operation.
Begin a Group Test
Instructions on how to start and conduct a group test procedure.
View the System Utility
Guide to access and view system utility settings and parameters.
Edit/Save the System Utility
Instructions on how to edit and save system utility parameters.
Structure of storage steps
Explains the organization of storage steps within groups and individual steps.
Menu parameter setup
Details how to set parameters for AC/DC withstanding voltage tests.
Continuous AC/DC withstanding voltage test (CAC/CDC)
Explains CAC/CDC test parameters, similar to ACW/DCW.
Insulation Resistance test (IR)
Details how to set parameters for Insulation Resistance tests.
Ground Bonding Test (GB)
Details how to set parameters for Ground Bonding tests.
Continuity Check (Cnt)
Details how to set parameters for Continuity Check tests.
Functionality of remote interface
Explains the inputs and outputs for remote control operation.
MAINTENANCE
Fuse Rating and type
Information on fuse types and ratings for replacement.
Cleaning
Instructions for cleaning the instrument.
Need help?
Do you have a question about the GPI-725A and is the answer not in the manual?
Questions and answers