Second Fix - Martin Audio C516 User Manual

<
CONTENTS
4.2
1. Attach the safety wire between the back can and loudspeaker baffle
with a screwdriver.
2. With the steel strip spring in its down position, insert the stud attached to
the loudspeaker magnet through the hole in the strip spring (see Fig. 4).
3. Push the retaining clip through the small hole in the stud.
4. Attach the spade terminals to the loudspeaker. The brown wire should
be connected to the + terminal, the blue wire to the - terminal.
5. Rotate the baffle slightly so that the port is clear of the spring and will
not foul it. Gently push the baffle upwards (see Fig. 5). The spring
action will draw the baffle into the can once past its initial resistance.
>
PRINT

Second fix

Martin Audio – C516 Ceiling Loudspeaker
Fig. 4
Fig. 5
6
GUIDES