Remote Control; The Cr10 Remote Control; Amplifier Commands - Arcam FMJ A18 Manual

remote
control

the cr10 remote control

The CR10 is pre-programmed for use with the A18 as
well as Arcam CD players (such as CD17).
The CR10 requires a clear line of sight to the front panel
display of A18 to ensure reliable operation. Make sure
you have inserted the two AAA batteries supplied before
attempting to use the CR10.
Keys on the CR10 that control the A18 are shown not
greyed-out.
inserting batteries into the

remote control

1. Squeeze the tab and lift off the remote control's
battery compartment cover.
2. Insert the two ' A AA' batteries supplied in the
proper direction, following the '+' and '–' marks
in the battery compartment.
3. Replace the battery compartment cover, locking
the tab with a click.
���� ����
���� ���� ��������� ���������
����� ����� ���� ���� ��� ��� ��� ���
� � � � � �
� � � � � �
� � � � � �
� �
����� �����
���� ����
����� ����� ����
���� ����
��� ��� ��� ��� �� �� ��� ���
��� ��� ��� ��� �� �� ��� ���
���� ���� ���� ���� ��� ��� ���� ����
���� ����
���� ���� ���� ����
��������� ���������
���� ����
e-9

amplifier commands

Toggles the mute function to silence speaker
-
output. Mute is displayed on screen when
active.
Decrease ( ) and increase ( )
VoL –
VoL– VoL+
amplifer volume
VoL +
Source Selects the amplifier input:
keys
DVD input
dVd
Satellite decoder input
sAt
AV (television sound) input
AV
DAB/FM/AM tuner input
tun
Auxiliary line input
AuX
Personal Video Recorder input
pVr
CD input
cd
Phono input
pho
Adjust bass levels (using and
bAss
VoL– VoL+
controls) between -7, through 0, to +7
Adjust treble levels (using and
treb
VoL– VoL+
controls) between -7, through 0, to +7
bAL Adjust balance levels (using and
VoL– VoL+
controls) between L (left) 9, through 0, to
R (right) 9
Toggles between PROC ON and OFF.
proc
PROC mode is only available if the input
AV
is selected
When in PROC mode, the and
VoL - VoL +
can be used to adjust the PROC volume
setting.
drct Toggles direct mode (i.e. tone defeat)
dIsp Cycles through display panel brightness
options (bright, off, dim)
Cycles through displaying the settings for
Mode
Bass, Treble and Balance