Related Manuals for Jet JDP- 20FT
Summarization of Contents
Safety
Authorized Use
Defines the intended application and limitations for the drill press.
General Safety Notes
Provides essential safety guidelines for operating the drill press.
Machine Specifications
Technical Data
Details the technical parameters and dimensions of the drill press models.
Noise Emission
Specifies the acoustic pressure levels during idling and operation.
Transport and Start Up
Transport and Installation
Guidance on moving and setting up the machine for operation.
Assembly
Instructions for putting together the machine components.
Machine Operation
Starting Operation
Steps to safely power on and begin using the drill press.
Machine Operation
Core procedures and best practices for using the drill press.
Setup and Adjustments
Removing the Chuck and Arbor
Procedure for detaching the chuck and arbor from the spindle.
Adjusting the Depth Stop
How to set the depth stop for consistent drilling depth.
Changing Spindle Speeds
Instructions for adjusting belt positions to change spindle speed.
Table Tilt Adjustment
Steps to adjust the angle of the work table.
Return Spring Adjustment
Guidance on adjusting the quill return spring tension.
Trouble Shooting
Motor Doesn't Start
Common causes and solutions when the motor fails to power on.
Chuck Will Not Stay on Spindle
Troubleshooting steps for issues with the chuck mounting.
Machine Vibration
Identifying and resolving causes of excessive machine vibration.
Drill Bit Burns
Diagnosing and fixing problems leading to drill bit overheating.
Drill Leads Off
Troubleshooting for inaccurate drilling alignment.
Wiring Diagrams
JDP-8BM, JDP-10BM
Electrical wiring schematic for JDP-8BM and JDP-10BM models.
JDP-13FM
Electrical wiring schematic for the JDP-13FM drill press.
Need help?
Do you have a question about the JDP- 20FT and is the answer not in the manual?
Questions and answers