Important Safety Instructions; Instructions Pertaining To A Risk Of Fire, Electric Shock, Or Injury To Persons; Personal Safety - Central Pneumatic 92917 Set Up And Operating Instructions Manual

ImPORTANT SAFETY
INSTRuCTIONS
INSTRuCTIONS PERTAINING
TO A RISk OF FIRE,
ELECTRIC SHOCk, OR
INjuRY TO PERSONS
WARNING – When using tools, basic
precautions should always be
followed, including the following:
General
a. To reduce the risks of electric
shock, fire, and injury to persons,
read all the instructions before
using the tool.
Work area
a. keep the work area clean and well
lighted. Cluttered benches and dark
areas increase the risks of electric
shock, fire, and injury to persons.
b. do not operate the tool in
explosive atmospheres, such as in
the presence of flammable liquids,
gases, or dust. The tool is able to
create sparks resulting in the ignition
of the dust or fumes.
c. Keep bystanders, children, and
visitors away while operating the
tool. Distractions are able to result in
the loss of control of the tool.

Personal safety

a.
Stay alert. Watch what you are
doing and use common sense
when operating the tool. Do not
use the tool while tired or under
the influence of drugs, alcohol, or
SKU 92917 For technical questions, please call 1-800-444-3353.
93253
medication. A moment of inattention
while operating the tool increases the
risk of injury to persons.
b. dress properly. do not wear loose
clothing or jewelry. Contain long
hair. keep hair, clothing, and
gloves away from moving parts.
Loose clothes, jewelry, or long hair
increases the risk of injury to persons
as a result of being caught in moving
parts.
c. Avoid unintentional starting. Be
sure the trigger is released before
connecting to the air supply. Do not
carry the tool with your finger on the
trigger or connect the tool to the air
supply with the trigger pressed.
d. do not overreach. keep proper
footing and balance at all times.
Proper footing and balance
enables better control of the tool in
unexpected situations.
e. use safety equipment. A
dust mask, non-skid safety
shoes and a hard hat must
be used for the applicable
conditions. Wear heavy-duty work
gloves during use.
f. Always wear eye
protection. Wear ANSI-
approved safety goggles
with side shields.
g. Always wear hearing
protection when using
the tool. Prolonged
exposure to high intensity
noise is able to cause hearing loss.
h. do not attach the hose or tool to
your body. Attach the hose to the
structure to reduce the risk of loss of
balance if the hose shifts.
Page 3