Central Pneumatic 92917 Set Up And Operating Instructions Manual page 6

on the proper maintenance of the
tool.
15. Fire fasteners into an appropriate
work surface only. Do not attempt to
fire fasteners into surfaces too hard
to penetrate. Do not drive fasteners
on top of other fasteners, or at too
steep of an angle. Fasteners can
ricochet causing personal injury.
16. Do not fire fasteners too close to the
edge of a workpiece. They may split
the workpiece and fly free, causing
personal injury.
17. Keep clear of the workpiece near the
area being fastened. Fasteners may
bend sideways during firing, causing
them to exit the workpiece at an
unexpected point, causing personal
injury.
18. Transport Tool safely. Always
disconnect air supply when moving
the tool. Carry the tool by the handle
and avoid contact with the trigger.
19. Hold tool away from head and body.
During operation the Tool may kick
back causing injury.
20. Do not fire fasteners into a workpiece
that has people, utility lines, or other
objects behind or inside it.
21. Keep balance while using this tool.
Keep area below clear if working in
an elevated location, and secure air
hose to prevent falls from bystanders
accidentally pulling on it.
22. Obey the manual for the air
compressor used to power this tool.
23. Install an in-line shutoff valve to allow
immediate control over the air supply
Page 6 For technical questions, please call 1-800-444-3353.
in an emergency, even if a hose is
ruptured.
24. Do not engrave or stamp anything
into the housing to prevent
weakening of the housing.
25. WARNING: Some dust created by
power sanding, sawing, grinding,
drilling, and other construction
activities, contains chemicals
known [to the State of California] to
cause cancer, birth defects or other
reproductive harm. Some examples
of these chemicals are:
• Lead from lead-based paints
• Crystalline silica from bricks and
cement or other masonry products
• Arsenic and chromium from
chemically treated lumber
Your risk from these exposures
varies, depending on how often you
do this type of work. To reduce your
exposure to these chemicals: work in
a well ventilated area, and work with
approved safety equipment, such as
those dust masks that are specially
designed to filter out microscopic
particles. (California Health & Safety
Code § 25249.5, et seq.)
26. WARNING: The brass components
of this product contain lead, a
chemical known to the State of
California to cause birth defects (or
other reproductive harm).
(California Health & Safety code §
25249.5, et seq.)
27. The warnings and precautions
discussed in this manual cannot
cover all possible conditions and
situations that may occur. It must
be understood by the operator that
common sense and caution are
factors which cannot be built into this
SKU 92917
93253