Connections Using Hdmi Cables; Hdmi Cable - Yamaha YSP-600 Owner's Manual

Connections

Connections using HDMI cables

This unit is equipped with 2 HDMI input jacks and 1 HDMI output jack. If your TV and other components have HDMI
jacks, use HDMI cables for simpler and easier connections, and you can skip the connection procedures from page 19 to
21. If your TV has a built-in digital satellite tuner and an optical digital output jack, connect the optical digital output jack
on your TV to the TV/STB OPTICAL DIGITAL IN jack on this unit.
Notes
• Even if you connect your TV and this unit via the HDMI jack, you need to connect the video input jack on your TV to the VIDEO
OUT jack on this unit in order to display the OSD of this unit.
• When HDMI CONTROL is set to OFF (see page 68) and this unit is in the standby mode, the signals input at the HDMI IN jacks are
not output at the HDMI OUT jack.
y
We recommend that you secure the HDMI cable(s) with adhesive tape, etc. once you have connected the HDMI cable(s) to the HDMI
jack(s) of this unit.
OUT DVD
L
R
VCR TV/STB
AUDIO INPUT
A
HDMI
input
Audio/Video
A

HDMI cable

18
En
Rear panel of this unit
IN AUX
HDMI
SUBWOOFER VIDEO TV/STB AUX
OPTICAL COAXIAL
OUT DIGITAL INPUT
Video Optical
input digital
output
TV
DVD SYSTEM
CONNECTOR
A
HDMI
output
DVD player/recorder
OSD video pin cable
Optical cable
*
This connection (except
for a game console) is not
necessary if your TV has a
built-in digital satellite
tuner, cable TV tuner, or
digital airwave tuner.
A
HDMI
output
Digital satellite tuner,
cable TV tuner,
digital airwave tuner,
or game console
Video
Audio