Table of Contents
Advertisement
Contents
Section
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Read the instructions before use!
Damaged appliances shall not be used.
The appliance and its supply cord must be placed in an indoor area not subject to splashes of
water or wet conditions and protected from or out of reach of animals.
Repairs shall be carried out only by a suitably qualified person.
This appliance shall not be used, cleaned or maintained by children or persons with reduced
physical, sensory or mental capabilities or lack of experience and knowledge without supervision.
Children shall not play with the appliance.
Ensure that nothing can restrict the movement of the trays or setting shelves. This may damage
the turning mechanism and invalidate the guarantee. Load the setting shelves evenly to help
prevent imbalanced operation. Ensure trays are pushed to the back of each shelf.
Disconnect the incubator from the mains power supply during cleaning. Ensure that all electrical
parts are kept dry.
Record your appliance serial number here: __________________
OVA-EASY 100
User Instructions
Subject
1
MJ1023 GB Issue 01
Page
2
3
3
4
6
9
9
10
12
13
13
14
15
15
17
19
Advertisement
Table of Contents
Related Manuals for Brinsea OVA-EASY 100 ADVANCE
Summarization of Contents
Quick Reference
MAIN MENU – QUICK REFERENCE
Details of the main menu options for quick reference.
DIGITAL CONTROL SYSTEM
NORMAL OPERATION
Describes the normal display and operation of the incubator.
POWER LOSS DISPLAY
Explains the display indicator for power interruptions.
HIGH TEMPERATURE ALARM DISPLAY
Details the display and action for high temperature alarms.
LOW TEMPERATURE ALARM DISPLAY
Details the display and action for low temperature alarms.
LOW ROOM TEMPERATURE ALARM
Explains the alarm for ambient room temperature being too low.
HIGH ROOM TEMPERATURE ALARM
Explains the alarm for ambient room temperature being too high.
AUTOMATIC SHELF LEVELLING
Instructions for manually levelling the incubator shelves.
TURN SYSTEM FAULT ALARM
Details the fault alarm for the automatic turning system.
CHANGING SETTINGS
Procedure for modifying and saving incubator settings.
Humidity and Ventilation
Monitor humidity levels
Guidance on monitoring and adjusting humidity levels for species.
Monitor egg weight loss
Method for monitoring humidity via egg weight loss.
Hatching humidity needs
Specific humidity requirements during the hatching phase.
Hatching door opening
Advice on opening the door during hatching.
Advance Humidity Pump
Information on the optional automatic humidity control system.
Humidity Pump Water Tube Fitting
Details on fitting the water tube for the humidity pump.
Egg Turning
SWITCHING AUTOMATIC TURNING ON AND OFF
Procedure to enable or disable the automatic egg turning system.
SETTING THE TURN DELAY INTERVAL
Configures the time between automatic egg turns.
LEVELLING THE SHELVES FOR LOADING (OR HATCHING)
Instructions for manually levelling shelves for egg loading or hatching.
Periodic Incubation Cooling
SETTING THE COOLING PERIOD.
Allows adjustment of the periodic cooling duration.
Troubleshooting
General guides
Common hatching problems, likely causes, and solutions.
Error messages
Explanation of error messages and troubleshooting steps.
Need help?
Do you have a question about the OVA-EASY 100 ADVANCE and is the answer not in the manual?
Questions and answers