Related Manuals for Smiths Tube
Summary of Contents for Smiths Tube
- Page 1 Pedestal Range Installation, commissioning and user manual Kiosk Trafalgar Tube Issue 002 | October 2018 ENGLISH | UK | IRL | SmithsEP.co.uk Issue 002 - October 2018 | SmithsEP.co.uk | 1...
-
Page 2: Table Of Contents
Important safety and installation instructions Application Please leave this Installation and User Guide with the owner of the property. Product Information Installation - Kiosk and Trafalgar Commissioning - Kiosk and Trafalgar Installation - Tube Commissioning - Tube Fault finding User Manual... -
Page 3: Declaration Of Conformity
Product name: Natural Convectors system. Drain the system or close the isolating valves. Product range: Pedestal: Kiosk, Trafalgar and Tube High temperature surface. Take utmost care to prevent people from getting in contact with the Conform to the following European Union hot surfaces of the appliance. -
Page 4: Important Safety And Installation Instructions
Important safety and installation instructions Prior to installation, read these installation and operating instructions. The installation and operation should also be in accordance with national regulations and accepted codes of good practice. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. -
Page 5: Application
Application Product performance Kiosk, Trafalgar and Tube are primarily intended for installation at floor level against a wall or window. Tube may be installed in any orientation on the floor or against the wall. Natural convectors can help reduce condensation on floor to ceiling glass... -
Page 6: Installation - Kiosk And Trafalgar
Installation - Kiosk & Trafalgar 1. Remove product 4. Position heater in required location from packaging ➂ ➃ ➀ ➄ Heat Exchanger ➀ TRV (Thermostatic Radiator Valve) ➁ ➁ LSV (Lockshield Valve) ➂ End Panels ➃ ➃ Bleed valve ➄... -
Page 7: Commissioning - Kiosk And Trafalgar
Commissioning 6. Prepare flow/return connection All factory fitted connections/compression joints should be inspected prior to filling the system, in and connect to heating system case of loosening during transit using suitable fittings 9. Commissioning • Pipe connection is 15mm • Align the TRV head over the valve body with •... -
Page 8: Installation - Tube
Installation - Tube Standalone: Tube is designed to be installed as standalone heat emitters. Each unit stands on its own with pipework being made through the feet in each end of the product. The heat-exchanger within the products casing is factory fitted with TRV &... - Page 9 Check connection is good and undamaged Pipe entry is through flooring surface. from transit. 7. Fix both ends to the floor 5. Position heater where required using suitable fixings 6. Prep flow and return 8. Connect system pipework to connections and ready system the TRV and Lockshield valves of pipework for connection each end of the product...
- Page 10 Installation - Tube 9. Refit end trims 11. Ensure that the TRV is set on the V position 10. Refit retaining screws to fix the end panels 12. Screw the TRV onto the product 10 | SmithsEP.co.uk | Issue 002 - October 2018...
-
Page 11: Commissioning - Tube
Commissioning All factory fitted connections/compression joints should be inspected prior to filling the system, in case of loosening during transit 13. Commissioning • Align the TRV head over the valve body with the indicator point at setting V. Ensure that the TRV head is square to the body, screw the TRV head onto the body in a clockwise direction until tight, being careful not to over –... -
Page 12: Fault Finding
Fault finding In the event of any difficulty, please contact us on +44 (0) 1245 324560. It will be more helpful if you do not remove the product from the central heating system. Fault Possible cause Checking/Solution Check pump is operating correctly Poor flow rate in heating system Bleed air from system Balance heating system... -
Page 13: User Manual
Pedestal Range User manual Kiosk Trafalgar Tube Issue 002 | October 2018 ENGLISH | UK | IRL | SmithsEP.co.uk Issue 002 - October 2018 | SmithsEP.co.uk | 13... -
Page 14: Important Safety Guidance
Important safety and installation instructions Prior to installation, read these installation and operating instructions. The installation and operation should also be in accordance with national regulations and accepted codes of good practice. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. -
Page 15: Introduction
How it works How to operate These products are natural convector heaters and This product is fitted with a Thermostatic work by air convection currents passing through Radiator Valve (TRV) to enable the user to set the high efficiency aluminium finned copper tube and control the ambient room temperature. -
Page 16: Fault Finding
Fault finding This product is covered by a free 5-year parts and labour guarantee (TRV 2 years). Please refer to the Fault finding table below for advice. In the event of difficulty, please contact us on +44 (0) 1245 324560. It will be helpful if you do not disconnect the product from your central heating system. -
Page 17: Registering Your Product
Registering your product Disposal Thank you for purchasing a Smith’s product. It has As part of the policy of continuous product been designed and manufactured to the highest improvement, Smith’s Environmental Products LTD quality standards to ensure it gives you efficient reserves the right to alter specification without and trouble-free service for many years. -
Page 18: Smithsep.co.uk | Issue 002 - October
Notes 18 | SmithsEP.co.uk | Issue 002 - October 2018... - Page 19 Notes Issue 002 - October 2018 | SmithsEP.co.uk | 19...
- Page 20 Happy to help To view the full product information download the datasheet at: Smith’s Environmental Products Ltd is one of the leading manufacturers of heating and cooling www.SmithsEP.co.uk products in the UK. We are committed to For product information, customer services or achieving the highest standards and our faith is sales support call us on +44 (0) 1245 324900 supported by a free five year parts and labour...
Need help?
Do you have a question about the Tube and is the answer not in the manual?
Questions and answers