Smiths HL 1000 User Manual

®
How an Ecovector fan convector works
Hot water from your central heating system passes through the heat exchanger transferring its heat
to the aluminium fins. Cooler air is drawn in by the fan and heated as it passes through the heat
exchanger before being Expelled gently back into the room. Fan convectors use around 25% less
energy than a radiator to heat up a room, give a more even temperature spread and achieve the
required temperature in much less time.
This heater is fitted with a low temperature cut
out thermostat that prevents the fan from
operating until the central heating system water
passing through the heat exchanger reaches 38°.
Heating
Ensure your central heating system is on, the heat
output switch set to normal l and the fan- only
switch set to RED (Heating). Providing the water
temperature in the system is more than 38°C and
the thermostat/s controlling your central heating
system is calling for heat your heater will switch on.
If you require a faster warm up move the heat output
switch to boost ll. moving the heat output switch to 0
will turn off the heater.

Air Circulation (summer use)

Ensure central heating is off. Set the fan-only switch
to BLUE and the heat output switch to either l or ll.
®
Ecovector will run to provide a cooling flow of air.
If the heater is being used in conjunction with a room
thermostat, the thermostat must be set to maximum.
Fault Finding
This heater is covered by a free five-year parts and labour guarantee. Please refer to the fault
finding section of the installation guide for advice. In the event of difficulty please contact us
on 01245 324560. it will be helpful if you do not disconnect the heater from the central
heating system.
Smith's Environmental Products Ltd,
Blackall Industrial Estate, South Woodham Ferrers, Chelmsford Essex CM3 5UW
Tel: 01245 324900 After Sales: 01245 324560 Fax: 01245 324422
E-mail: info@smiths-env.com Web: www.smiths-env.com
For Ireland (Republic & Northern), contact MT Agencies on 00 353 1 864 3363
In light of our policy of continuous development Smith's Environmental Products Ltd reserve the right to
alter specifications without prior notice.
Iss: 3
8
Sept 2013
Versatile, energy efficient heating
ECOVECTOR
Fan Convector
Models
HL 1000, HL 1000-12V
HL2300, HL2900, HL4000
Installation & USER GUIDE
Dear Installer,
The following items should be included in the carton:
•
Product complete with cable
•
Transformer (HL 1000-12V only)
In the event of items missing or visible damage please
contact us on 01245 324560. We would be most grateful if
you would leave this Installation & User Guide and the
Guarantee Registration Card with the owner of the property.
Thank you for your co-operation.
Steve Russell
Technical Services Manager
® ® ® ®
High Level