Table of Contents
Advertisement
Quick Links
- 1 List of Cloud Router Switch Crs226-24G-2S+ Series
- 2 Block Diagram of Cloud Router Switch Crs210-8G-2S+ Series
- 3 Routerboard Does Not Boot
- 4 If Board Leds Turn On, Board Is Unreachable through Lan or Sfp+ Ports and Console Shows no Output
- 5 Problems with Ether Ports
- 6 Temperature and Voltage Monitor or Lcd Does Not Work
- 7 Console Does Not Work
- Download this manual
Advertisement
Table of Contents
Related Manuals for MikroTik CRS226-24G-2S+RM
Summarization of Contents
Cloud Router Switch Series List
Device Disassembly Guide
Step-by-step instructions for safely disassembling the hardware.
Routerboard Power On Failures
Initial Power Problem Diagnosis
Identifying the initial area to check for power issues.
Troubleshooting Power Input Failure
Steps to diagnose and fix issues with the main power input connector.
Troubleshooting POE_IN Power
Steps to diagnose and fix issues when using POE_IN power.
Troubleshooting 3.3V Rail Failure
Steps to diagnose and fix issues with the 3.3V voltage rail.
Troubleshooting 1.2V Rail Failure
Steps to diagnose and fix issues with the 1.2V voltage rail.
Routerboard Boot Failures
Netinstall Firmware Installation Issue
Diagnosing firmware installation issues with Netinstall.
Unreachable Board with LEDs On
Diagnosing issues when board is powered but unreachable.
Ethernet Port Problems
Ethernet Port Malfunction
Troubleshooting steps for non-functional Ethernet ports (Eth1-Eth24).
SFP+ Port Malfunction
Troubleshooting steps for SFP+1 and SFP+2 port issues.
Need help?
Do you have a question about the CRS226-24G-2S+RM and is the answer not in the manual?
Questions and answers