Table of Contents
Advertisement
OPTION menu
Remote control
See "Navigating through the MENU" on page 27.
See "Main menu and Sub-menu" on page 28.
INPUT GUIDE
When you change the input method, the guidance
appears in the upper right corner of the screen. The
following display methods are available. Press I H to
cycle through the options.
Options
Display the input method by graphic. The
INPUT GUIDE will go out after
10 seconds without any operation.
If you select any of the COMPUTER
DETAILED
terminals which has no signal, the
computer connection guidance will be
displayed. See "Computer connection
guidance" on page 46.
Display the input method by text. The
INPUT GUIDE will go out after
SIMPLE
5 seconds without any operation.
Turn off the guidance.
OFF
STARTUP LOGO
You can switch the logo on/off that is displayed when
starting up the projector. Press I H to select the
required option. STARTUP LOGO will be displayed for
30 seconds.
ON
USER
OFF
Editing the original text
If you select USER, you can display a 2 lines of
original text which contains up to 40 characters in
each.
TEXT CHANGE
OK
E
NGLISH - 34
Control panel
MENU
RETURN
Function
Active
Display the original text
Deactive
ALL DELETE
SPACE
CANCEL
1. Select USER and press the ENTER button.
2. Select the required line to enter or edit the original
text, and press the ENTER button.
3. Use F G I H to specify the location of the
required character and press the ENTER button.
The selected character will be displayed in the box.
4. Repeat the step 3 until you finish the text to display
in a line.
To delete all the entered characters, move the cursor
to ALL DELETE and press the ENTER button.
To insert a character in the entered text line, move
the cursor to the text box to select the required place,
and press G and return to the character field.
To delete a character, press the DEFAULT button or
move the cursor to the required character then press
the DEFAULT button.
5. Select OK and press the ENTER button to set the
entered text in a box.
Press G and edit the TEXT2 if you need to, and
repeat the step 3 - 5.
Select CANCEL or press the MENU/RETURN button
to return to the previous menu without setting.
COMPUTER2 SELECT
You can switch the function of the COMPUTER2 IN/
1 OUT terminal.
INPUT
COMPUTER2 IN
OUTPUT
COMPUTER1 OUT
RGB/YPBPR
The projector will detect the signal from the
COMPUTER1 IN or COMPUTER2 IN/1 OUT terminal if
the signal is RGB or YP
P
B
automatic system and switch the settings manually.
AUTO
Automatic adjustment
RGB
For RGB signals
YP
P
For YP
B
R
NOTE:
• Available with 480i, 576i, 480p, 576p,1 125 (1 080)/60i,
1 125 (1 080)/50i, only.
• When the input signal is not selected correctly with
AUTO setting, select RGB or YP
WIDE MODE
When projecting WIDE signals, switch to ON to display
the image in well adjusted size.
OFF
For 4:3 signals
ON
For WIDE signals
(16:9, 16:10 and 15:9)
. You can turn off the
R
P
signals
B
R
P
manually.
B
R
Advertisement
Table of Contents
