Table of Contents
Advertisement
Connections
Before connection to the projector
Read and follow the operating and connecting instructions of each peripheral device.
The peripheral devices must be turned off.
Prepare the connecting cables that match with the projector and peripheral device terminals.
If the input signal is affected by signal jitter, the projected image may have poor image quality and timebase
correction is effective.
Confirm the type of video signals. See "List of compatible signals" on page 44.
When you connect more than one AV equipment, switch the audio connection manually.
Connecting example: AV equipment
Connecting with VIDEO IN/S-VIDEO IN
Connecting example: Computers
Computers
RGB signal cable
Serial cable
NOTE:
• When COMPUTER2 SELECT in the OPTION menu is set to OUTPUT, do not connect any input signals.
• See CD-ROM contents for the wireless connection. (PT-LB80NTU/PT-LB75NTU only)
To S-VIDEO output
OR
To video output or
audio output
Audio system
DVD player
Video player
Monitor
Audio system
E
NGLISH - 17
Advertisement
Table of Contents
