Related Manuals for KUHN GMD 600 G II-HD
Summarization of Contents
Safety
Designated Use of the Machine
Defines the intended purpose and restricted applications of the disc mowers.
General Safety Recommendations
Provides essential safety principles for operating the machine.
Attachment
Details the procedures and precautions for attaching the machine to the tractor.
Power Take-Off
Covers safety guidelines and procedures for connecting and using the PTO shaft.
Hydraulic System
Outlines safety precautions and procedures for the hydraulic system.
Maintenance
Lists essential safety checks and procedures for machine maintenance.
Special Safety Recommendations
Provides specific safety advice for operating the mower.
Adapting to Tractor
Adjustment of Chassis Height from the Ground
Explains how to adjust the mower's chassis height relative to the ground.
Adjustments
Outer Swath Wheel
Describes how to adjust the angular position of the swath wheel for optimal crop flow.
Cutting Height
Explains how to adjust the cutting height by altering the cutterbar tilt angle.
Safety Break-away
Details the function and adjustment of the safety breakaway latch.
Adjustments and Maintenance
Inspection of Knives and Securing Elements
Covers the inspection of cutting knives and their securing components for wear and damage.
Knife Replacement
Guides on how to replace worn or damaged cutting knives.
Discs Replacement
Explains the procedure for replacing the mower discs.
Belts
Details how to properly tension and maintain the mower's belts.
Adjustment of Compensating Spring Tension
Describes how to adjust the tension of the compensating spring for optimal ground pressure.
Optional Equipment
Hydraulic Adaptors
Lists available hydraulic adapters for different connector types.
High Cone
Explains the use of a high cone to reduce swath width on specific models.
Inside Swath Wheel
Details the installation of an inside swath wheel to further reduce swath width.
Inside Swath Wheel
Describes an inside swath wheel for reducing swath width on GMD 600 GII.
Inner Swath Board
Explains the use of an inner swath board set to reduce swath width on specific models.
Lengthened Left Hitch Pin
Details the installation of a lengthened hitch pin for machine offsetting.
Raised Skids
Describes the optional raised skid shoe kit for adjustable cutting height and sticky grounds.
Signalling Elements
Covers the installation of optional signalling elements for road use.
Quick Hitch Bracket
Details the availability and attachment of a quick hitch bracket.
Need help?
Do you have a question about the GMD 600 G II-HD and is the answer not in the manual?
Questions and answers