Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for DSC HSM2HOST4
Summarization of Contents
1.1 Introduction
1.1.1 Installation Process Overview
Steps to install and set up the HSM2HOSTx and wireless devices.
1.1.2 Controls & Indicators
Details on status LEDs and tamper features of the HSM2HOSTx module.
1.1 Setup & Wiring
1.1.1 In the Box
Lists the components included in the HSM2HOST package.
1.1.2 Choose a Mounting Location
Guidance on selecting an optimal location for the HSM2HOST receiver.
1.1.3 Connect the HSM2HOST
Instructions for wiring the HSM2HOST module to the alarm panel.
1.1.4 Enroll The HSM2HOST
Procedure for enrolling the HSM2HOST module onto the alarm panel.
1.1.5 Delete the HSM2HOST
Steps to remove the HSM2HOST module from the system.
1.1.6 Test HSM2HOST Location for RF Interference
1.1.7 Permanently Mount
Instructions for securely mounting the HSM2HOST unit after placement testing.
1.1.8 Other Options
Overview of additional programming options for the HSM2HOST.
2.1 Wireless Device Setup and Programming
2.1.1 [804]>[000] Enroll Wireless Devices
Method to enroll wireless devices like contacts, motion sensors, and sirens.
1.1.2 [804]>[001]-[716] Wireless Device Configuration
Procedures for configuring enrolled wireless devices such as zones, sirens, and keys.
2.1.3 [804]>[801] RF Jam Detect
Configuration options for detecting and reporting RF jamming.
2.1.4 [804]>[802] Wireless Supervision Window
Programming the time delay before a wireless device absence generates a fault.
2.1.5 [804]>[810] Wireless Option 1
2.1.6 [804]>[821]-[841] Wireless Device Defaults
Modifying default parameters for newly enrolled wireless devices.
2.1.7 [804]>[901]-[905] Delete Wireless Devices
2.1.8 [804]>[911]-[915] Modify Wireless Devices
Updating configuration options for already enrolled wireless devices.
2.1.9 [804]>[921]-[925] Replace Wireless Devices
Replacing a faulty wireless device while retaining its original configuration.
2.1.10 [904] Placement Testing Wireless Devices
2.1.11 [990] Show All Devices
Displays results of the 'Test All Devices' function.
[611] Show RF Problems
Shows only problematic RF test results for troubleshooting.
1.1.12 [997] View Module Information
Displays model, hardware, and software version of the HSM2HOSTx.
1.1.13 [999] Reset to Factory Defaults
Resets module programming to factory default settings.
Need help?
Do you have a question about the HSM2HOST4 and is the answer not in the manual?
Questions and answers