Advertisement
Advertisement
Table of Contents
Related Manuals for RAMSET Twist Lok TS750P
Summarization of Contents
The Ramset Powder Actuated Fastening System
System Introduction and Importance
Overview of the PA system, its benefits, and the importance of reading the manual.
Safety Precautions
General Operational Safety Rules
Covers essential safety rules for tool operation, handling, and user protection.
Fastening Material and Location Restrictions
Details limitations on materials and locations for safe and effective fastening.
Safety Precautions (Continued)
Advanced Safety Practices and Visual Guidance
Further safety guidelines, including correct tool positioning and visual aids.
Operator Training and Daily Inspection
Operator Training Philosophy and Requirements
Emphasizes training importance and manual study for safe tool operation.
Daily Inspection Protocol and Warnings
Procedure for daily tool checks, warnings on damaged parts, and disclaimers.
Tool Safety Features
Mechanisms to Prevent Accidental Firing
Details features designed to prevent unintentional firing and jab firing.
Key Component and Design Features
Highlights features like Spall Shield, Outer Housing, and load strip indexing.
Tool Kits and Accessories
Kit Contents and Accessory Information
Details contents of TS60P, STRIKER, TS750P tool kits and TM40 magazine.
Tool Features and Capabilities
Design Aspects for Reliability and Comfort
Covers features like reliability, light weight, thermal insulation, and operator comfort.
Operational Features and Adjustments
Explains power level adjustment, collated loads, and Twist Lok™ feature.
Technical Specifications
Tool Performance Data Comparison
Provides detailed technical data and specifications for different tool models.
Routine Tool Maintenance
Maintenance Schedule and Overhaul Requirements
Outlines procedures for cleaning, oiling, and periodic overhaul of the tool.
Power Load System
Power Load Identification and Adjustment
Details power load colours, order numbers, and power level adjustment.
Selecting the Correct Fastener
Fastener Selection for Concrete Applications
Guidance on choosing the correct fastener length for concrete fastening.
Fastener Selection for Steel Applications
Guidance on choosing the correct fastener length for steel fastening.
Fastener Selection Guidelines (Continued)
Using Discs for Enhanced Fastening
Explains the function and benefits of using discs with fasteners.
Insulation Fastener Application Notes
Instructions for selecting and using insulation fasteners.
Fastener Assemblies
Drive Pins for TS60P & TS750P
Lists drive pin specifications, including shank length, thickness, and order numbers.
Threaded Studs for TS60P & TS750P
Lists threaded stud specifications, including shank and thread length, and order numbers.
Fastener Assemblies and Accessories
Assemblies and Collated Pins
Details assemblies with clips, collated pins for TM40/Striker, and insulation fasteners.
Available Tool Accessories
Lists various accessories like fastener guides and couplings.
TM40 Magazine Troubleshooting
Common TM40 Issues and Solutions
Provides a guide to common problems with the TM40 magazine and their remedies.
Operating Instructions
Pre-Operation Preparation and Safety Checks
Steps before use, including safety gear, area clearance, and tool checks.
Operating Instructions (Continued)
Tool Cycling and Fastener Loading
Instructions on how to cycle the tool and load fasteners.
Firing and Fastener Setting Adjustment
Guidance on firing the tool and adjusting fastener setting.
Operating Instructions (Continued)
Power Adjustment and Repeat Operations
Details on adjusting power levels and repeating operations.
STRIKER™/TM40 Specific Cycling
Specific instructions for cycling the STRIKER™ and TM40 tools.
Operating Instructions (Continued)
Loading Fasteners and Magazine Operation
Steps for loading fasteners into the magazine and operating the cover.
Inserting Power Load Strips
Procedure for inserting the power load strip into the tool handle.
Operating Instructions (Continued)
Final Firing Procedure and Misfire Handling
Instructions for firing and handling misfires with safety warnings.
Service Procedure: Disassembly
Step-by-Step Disassembly Guide
Detailed steps for disassembling the tool's main components.
Component Inspection and Service Warnings
Guidance on inspecting parts and warnings regarding service.
Service Procedure: Reassembly
Tool Reassembly Steps
Instructions for reassembling all components in reverse order.
Service Procedure: Reassembly (Continued)
Final Dry Cycle Testing
Procedure for dry cycle testing to ensure correct functioning after reassembly.
TM40 Magazine Installation
TM40 Magazine Installation Steps
Step-by-step guide for installing the TM40 magazine onto the tool.
TM40 Magazine Installation (Continued)
Reassembly and Testing of TM40
Reassembling the tool with the magazine and performing dry cycle tests.
TS60P/TS750P Parts Identification
Component List and Part Numbers
Detailed list of parts for TS60P/TS750P with item numbers and kit numbers.
TM40 Parts Identification
TM40 Component List and Part Numbers
Detailed list of parts for the TM40 magazine with item numbers and kit numbers.
Ramset Global Support
Regional Contact and Service Information
Contact details and addresses for Ramset offices in various countries.
Need help?
Do you have a question about the Twist Lok TS750P and is the answer not in the manual?
Questions and answers