Related Manuals for Lewmar S2000
Summarization of Contents
Introduction
Product Support
Guidance on obtaining technical assistance and support for Lewmar products.
CE Approvals
Information regarding the product's CE approval certificates.
Important Information About This Manual
Key warnings about safety and potential product damage highlighted in the manual.
Specification
Electric Specifications
Detailed electrical parameters, including voltage, power, current draw, and weight.
Gypsy Specifications
Specifics on the gypsy design tailored for 12-16mm diameter leaded lines.
Dimensions
Technical drawings illustrating the physical dimensions of the S900 and S2000 models.
Safety Notice
Windlass General Safety
Essential general safety guidelines and precautions for windlass operation and usage.
Fitting Safety
Safety considerations and warnings specifically related to the installation process.
Electrical Safety
Critical safety advice concerning the electrical installation of the windlass unit.
Installation
Basic Requirements
Lists essential tools and materials needed for the windlass installation.
Accessories
Recommendations for using genuine Lewmar parts to ensure performance and warranty.
Bulkhead Preparation
Guidance on selecting and preparing the mounting location for the windlass.
Bulkhead Fitting
Step-by-step instructions for physically mounting the windlass to the vessel's bulkhead.
Loading the Anchor Rode
Procedure for correctly loading the anchor rode onto the windlass.
Fitting Auto-Stop Sensor
Instructions for installing the auto-stop sensor for automatic anchor stowage.
Electrical Wiring
Electric Cable Selection
Guidance on choosing appropriate electrical cable sizes based on length and voltage drop.
Wiring
Comprehensive wiring instructions, material recommendations, and overload protection advice.
Control Switch Installation
Information on installing control switches and optional remote controls.
S900 Wiring Diagram
Schematic illustrating the electrical connections for the S900 model.
S2000 Wiring Diagram
Schematic illustrating the electrical connections for the S2000 model.
Operation
Manual Controlled Freefall
Procedure for operating the windlass in manual freefall mode for deployment.
Power Up/Down
Steps for releasing the anchor and retrieving it using powered controls.
Servicing
Servicing Schedule
Recommended maintenance tasks and frequency for the windlass.
Gypsy Replacement/Service
Detailed steps for servicing and replacing the windlass gypsy.
Parts List
An illustrated list of all available spare parts for the windlass.
Troubleshooting
Anchor Rode Pays Out Independently
Guidance on fixing the issue of the anchor rode paying out when the windlass is idle.
Failure to Operate or Sluggish Operation
Diagnosing electrical issues that cause the windlass to fail or operate slowly.
Failure to Operate
Troubleshooting steps for diagnosing operational failures, checking voltage and components.
Warranty
Conditions and Limitations
Outlines the terms, conditions, and limitations of the product warranty.
Exceptions
Lists specific products or applications excluded from warranty coverage.
Liability
Details Lewmar's liability and exclusions as permitted by law.
Procedure
Instructions for initiating and processing a warranty claim.
Need help?
Do you have a question about the S2000 and is the answer not in the manual?
Questions and answers