Advertisement
Quick Links
Product overview
Fig. 1: Schematic illustration of VSD35-1-AK-M-L/000
①
Diffuser face
②
Adjustable air control element
③
Neck
④
Plenum box
⑤
Suspension lug
⑦ – ⑨: Optional equipment
This manual describes the following product types: - VSD15, VSD35, VSD50, VSD35-Varyset,
Installation manual
Air terminal devices
Slot diffusers, Type VSD...
Air terminal devices Slot diffusers, Type VSD...
GB/en
⑥
Spigot
⑦
Lip seal
⑧
Damper blade for volume flow rate balancing
⑨
Clamp fixing
VSD50-1-LT, VSD35-3-AZ
TROX GmbH
Heinrich-Trox-Platz
47504 Neukirchen-Vluyn
Germany
Phone: +49 (0) 2845 2020
+49 (0) 2845 202-265
E-mail: trox@trox.de
http://www.troxtechnik.com
1
Advertisement
Related Manuals for Trox VSD50-1-LT
Summarization of Contents
Product Overview and Types
Schematic Illustration and Components
Schematic illustration of VSD35-1-AK-M-L/000 with labeled components and optional equipment.
Supported Product Types
List of air terminal device product types described in this manual.
Important Notes and Safety Guidelines
Manual Information and Qualified Personnel
Guidance for correct installation and requirements for qualified personnel.
Personal Protective Equipment and Correct Use
Guidelines on PPE, safe operation, and intended use of air terminal devices.
Liability Disclaimer
Manufacturer's disclaimer regarding damages from non-compliance or misuse.
Transport and Storage Procedures
Delivery Check and Storage Guidelines
Procedures for checking delivery, handling, and storage conditions.
On-Site Transport Safety
Safety precautions during on-site movement of the product.
Installation Material and Packaging
Notes on installation material supply and packaging disposal.
Installation Guidance
General Installation Requirements
General information, personnel, protective equipment, and installation notes.
Ceiling Installation Methods
Instructions for ceiling installation, linear runs, and continuous ceilings.
Panelled Ceiling and End Seal Installation
Details on installation in panelled ceilings and fitting end seals for VSD15.
Concealed Screw Fixing Installation
Procedure for fixing the diffuser face with concealed screw fixing.
Wall Opening Installation
Installation details for VSD50-1-LT and VSD35-3-AZ into wall openings.
Commissioning, Maintenance, and Cleaning
Air Connection and Initial Commissioning
Connecting the diffuser and initial checks before commissioning.
Volume Flow Rate Balancing
Adjusting the damper blade for volume flow rate balancing.
Setting Air Discharge Direction
Schematic diagrams illustrating the setting of air control elements for various airflow directions.
Maintenance and Cleaning Procedures
Guidelines for cleaning air terminal devices, avoiding specific agents.
Need help?
Do you have a question about the VSD50-1-LT and is the answer not in the manual?
Questions and answers