Advertisement
Quick Links
Product overview
Fig. 1: Schematic illustration of VSD35-1-AK-M-L/000
①
Diffuser face
②
Adjustable air control element
③
Neck
④
Plenum box
⑤
Suspension lug
⑦ – ⑨: Optional equipment
This manual describes the following product types: - VSD15, VSD35, VSD50, VSD35-Varyset,
Installation manual
Air terminal devices
Slot diffusers, Type VSD...
Air terminal devices Slot diffusers, Type VSD...
GB/en
⑥
Spigot
⑦
Lip seal
⑧
Damper blade for volume flow rate balancing
⑨
Clamp fixing
VSD50-1-LT, VSD35-3-AZ
TROX GmbH
Heinrich-Trox-Platz
47504 Neukirchen-Vluyn
Germany
Phone: +49 (0) 2845 2020
+49 (0) 2845 202-265
E-mail: trox@trox.de
http://www.troxtechnik.com
1
Advertisement
Related Manuals for Trox VSD35-3-AZ
Summarization of Contents
Important Notes
Information on Installation Manual
Guidance on how to use the manual for safe and efficient installation and operation.
Qualified Staff
Defines specialist personnel as those with adequate training, knowledge, and experience for the work.
Limitation of Liability
Manufacturer's disclaimer for damages resulting from non-compliance, incorrect use, or unauthorized modifications.
Personal Protective Equipment
Requirement to wear appropriate PPE to minimize health or safety hazards during work.
Correct Use
Describes the intended use of air terminal devices for ventilation in various room types.
Transport and Storage
Delivery Check
Procedure for checking units for transport damage and completeness upon delivery.
Fixing and Installation Material
Notes that fixing and installation material is not part of the supply package and must be provided separately.
Transport on Site
Safety warning about sharp edges and the need for PPE and caution during handling.
Storage
Guidelines for proper storage, including packaging, environmental conditions, and temperature.
Packaging
Instruction for proper disposal of packaging material.
Installation
General Information
Provides general guidance on personnel, protective equipment, and installation notes.
Installation in Panelled Ceilings
Details on installing diffusers in panelled ceilings, including end seals for linear runs.
Slot Diffusers with Concealed Screw Fixing
Instructions for fixing the diffuser face with concealed screws after false ceiling completion.
Installation into a Wall Opening
Specifics for installing VSD50-1-LT and VSD35-3-AZ into wall or bulkhead openings.
Commissioning, Maintenance and Cleaning
Air Connection
Describes the diffuser spigot and sealing for duct connection.
Initial Commissioning
Checks required before starting commissioning, focusing on seating, cleanliness, and connections.
Volume Flow Rate Balancing
Explains the need to balance flow rates for multiple diffusers and how to adjust the damper blade.
Setting Air Discharge Direction
Illustrates airflow directions and corresponding air control element settings for ceiling diffusers.
Slot Diffusers for Wall Installation
Shows airflow directions and settings for VSD50-1-LT and VSD35-3-AZ wall diffusers.
Maintenance and Cleaning
Guidelines for cleaning diffusers using damp cloths and mild cleaners.
Need help?
Do you have a question about the VSD35-3-AZ and is the answer not in the manual?
Questions and answers