ZENEC ZEM-W600DDMM Instruction Manual page 38

18. VOL []/[]-buttons
■ Press the VOL []/[]-button to decrease or increase the volume
19. PBC/LOC-button
■ Press the PBC/LOC-button to select the play mode (PBC on/off).
■ Press the PBC/LOC-button under radio mode to scan (5 seconds) all preset stations of
the current band.
20. STOP-button
■ Press the STOP-button under CDC mode to stop the playback of a disc.
21. AUDIO-button
■ Press the AUDIO-button under CDD mode to select the audio language which is stored
on a DVD during playback.
22. TITLE-button
■ Press the TITLE-button under CDC mode to display the DVD title during playback.
23. SUBTITLE-button
■ Press the SUBTITLE-button under CDC mode to select the language of the subtitle
which is stored on a DVD during playback.
24. ANGLE-button
■ Press the ANGLE-button under CDC mode to select from different filming angles stored
on a DVD during playback. It's only available when playing a DVD with tracks recorded
from different angles.
25. GOTO-button
■ Press the GOTO-button under CDXC mode to select playtime and desired chapter.
26. SLOW-button
■ No function.
27. RPT–button
■ Press the RPT-button under CDC mode to repeat the playback of a disc or a track/
chapter.
28. ANGLE []/[]-button
■ No function.
NOTE
■ Maximum IR distance is 3 meters from the sensor.
■ Direct sunlight or very bright light reduces sensitivity of the remote control signal
commands. Make sure the unit is not located in direct sunlight.
■ Obstructions between the remote sensor and remote control may disrupt reception.
38