Oe Radio-/Navi-Model Not At All Or Only Partially Supported; Supplemental Functions; Optionally Available Equipment - ZENEC ZE-NC3810 - EXTENDED COMPATIBILITY INFO Manual

The following OE FORD Radios/Navis can be replaced
with the ZE-NC3810 :
OE Radio-/Navi-Model
Audiosystem 6000 CD
Audio-Sony-CD
Audio-Sony-6CD
Ford SD-Navigationssystem

Supplemental functions:

• Status of the air-condition displayed on the ZE-NC3810
To be able to use that feature, your car has to be equipped with the OE Dual-zone Electronic Automatic
Temperature Control (DEATC). The display of the seat heating status is not supported, since relevant
data is not present on the CAN bus.
• Making a call via the steering arm controls
Note: You will have to record a suitable voice tag.
You can find detailed information regarding the steering arm, and its remote control functions respec-
tively, on www.zenec.com > „support".
• Automatic toggling into camera mode
If you have connected an RVC and it has been activated via setup, it will automatically enter camera
mode if reverse is engaged.

Optionally available equipment:

Digital TV receiver (DVB-T)
The following tuners are compatible:
• ZENEC ZE-DVBT25*:
• ZENEC ZE-DVBT50*:
* Optional units are controlled via touchscreen of the ZE-NC3810.
Reverse vehicle cameras
• ZENEC offers vehicle specific as well as generic RVC´s for a wide range of purposes.
Please refer to www.zenec.com and the user manual for more information
2 of 2
Publ. 11.05.2010 UM / JL
not at all or only partially supported
optional Voice Control
optional Voice Control
optional DAB receiver
optional DAB receiver
optional Voice Control
2-channel diversity DVB-T tuner.
2-channel diversity DVB-T tuner