➜ Bei Fragen oder Problemen wenden Sie sich an ➜ Pls contact your ZENEC dealer or distributor where you Ihren ZENEC-Händler, bei dem Sie das Gerät gekauft have bought the unit, if you have any problems or further haben.
Page 3
Für den optimalen Halt montieren Sie For best stability of the unit inside the die beiliegenden Führungsschienen dashboard, please mount the die-cast (No.12) mit den entsprechenden rails (No.12/packing list), using the Schrauben gemäss Packliste. appropriate screws. Connect the TMC module (No.6) Das TMC-Modul (No.6) wird an das ZE-NC2010 mit Mini-USB und dem via Mini-USB and the white Fakra...
Montage: Installation: Hebeln Sie vorsichtig das Gitter Lever up the metal mesh top cover. heraus. Beginnen Sie an der zur Start with the side that is close to Scheibe zugewandten Seite. the windshield. Nachdem das Gitter abgenommen After the metal mesh has come off, wurde, trennen Sie den Stecker von proceed with unplugging the der Unterseite des Gitters.
Page 5
Lösen Sie dann die 4 Torx-Schrau- Unscrew the four Torx head screws ben, die das Radio fixieren und that fix the radio to the dashboard. ziehen Sie das Gerät heraus. Pull the head unit out. Lösen Sie die Verankerung des The MOST plug on the backside of MOST-Steckers und ziehen Sie the head unit can be unlocked by...
Page 6
CAN Bus interface Steckbares Anschlusskabel USB Stick Detachable cable USB stick Firma/Company: T O U C H A N O T H E R W O R L D ZENEC by ACR AG Bohrturmweg 1 CH-5330 Bad Zurzach Schweiz E-Mail: support@zenec.com...
Need help?
Do you have a question about the ZE-NC2010 - MOUNTING INSTRUCTIONS GOLF V and is the answer not in the manual?
Questions and answers