ZENEC ZE-NC3810 - EXTENDED COMPATIBILITY INFO Manual

ZE-NC3810 Extended compatibility info

Time settings

Make sure the original radio is set to „automatic" instead of „manual" in the time settings menu. If it is still set
to „automatic" you will not be able to set the time of the boardcomputer anymore, as it is relying on the trans-
mission of time data through the original radio. The ZE-NC3810 does not support that function. Depending on
vehicle configuration it might not be possible to change from „automatic" to „manual" after radio swapping.
You will most likely be forced to reinstall the original radio, for the sole purpose of setting the time,
if you omit this step.

Compatible vehicles:

Ford model
(inkl. all subtypes/special editions)
Focus
Mondeo
S-Max

Limitations:

• OE voice command systems are not supported.
• Depending on vehicle configuration the screen dim function might not be supported.
• The „velocity controlled volume" function as found on the OE radios /navigation units is not supported..
• It is not possible to replace the FORD DVD Navigation System featuring a 17,8 cm/ 7" touchscreen with
the ZE-NC3810.
• The optional driver display FORD Convers+ and the FORD HMI are not supported by the ZE-NC3810.
• The physical dimensions of the OE radios have to be compatible with the dimensions
of the ZE-NC3810.
• The OE rear view cameras are not supported.
1 von 2
Publ. 11.05.2010 UM / JL
Year
from 2007
from 2007
from 2008