Related Manuals for Amsco EAGLE SERIES 3023
Summarization of Contents
Summary of Safety Precautions
Burn and Shock Hazards
Details critical warnings regarding potential personal injury or equipment damage from electrical and heat hazards.
Slipping Hazard Warning
Advises on preventing slippery floor conditions due to spills or condensation in the loading area.
Explosion Hazard Warning
Highlights that the sterilizer is not designed for processing flammable liquids.
Equipment Damage Cautions
Provides cautions to prevent damage to the sterilizer, such as avoiding abrasive materials and securing piping.
Installation Verification
Installation Checklist
A comprehensive checklist to ensure the sterilizer installation is complete and correct according to provided instructions.
Optional Steam Generator Filling and Starting
Step-by-step procedure for filling and starting the optional electric steam generator boiler.
Service Adjustments and Special Features
Automatic Duplicate Print Function
Enables automatic printing of a duplicate record for each sterilization cycle.
Intermittent Buzzer Setting
Allows setting the intermittent buzzer to not sound when a cycle is complete.
Access Code for Cycle Value Settings
Procedure for setting and managing an access code to modify sterilizer cycle values.
Language Selection for Display and Printout
Procedure to set the sterilizer's display and printout language to English, French, or Spanish.
Setting the Sterilizer Identification Number
Allows setting a specific identification number (00-99) for the sterilizer.
Setting Sterilizer Clock and Calendar
Instructions on how to set the internal clock and calendar for accurate record-keeping.
Automatic Utilities Control Scheduling
Configures automatic shutdown and restart times for sterilizer utilities.
Laboratory Mode Configuration
Details on settings and adjustments specific to laboratory use, including time formats.
Sterilize Temperature Overdrive Adjustment
Adjusts the temperature overshoot setting to ensure effective load temperature control.
Undertemperature Recovery Function
Configures how the sterilize timer behaves when chamber temperature drops below the set point.
Steam Pressure Regulator for Low Temperatures
Information on adjusting the steam pressure regulator for sterilization below 250 F, requiring a service technician.
Routine Maintenance
Daily Cleaning and Maintenance
Procedures for daily cleaning of the chamber, drain strainer, and optional steam generator.
Weekly Maintenance Procedures
Includes weekly flushing of the chamber drain and checking control/status signals.
Monthly Lubrication and Checks
Tasks include lubricating door hinges and inspecting the door gasket.
Quarterly Lubrication and Inspection
Involves greasing the door post and inspecting the door gasket for wear.
Optional Steam Generator Cleaning
Requires quarterly cleaning and yearly descaling of the optional steam generator.
Change Paper Roll
Procedure for replacing the printer paper roll.
Install Chamber Door Gasket
Detailed instructions for installing a new door gasket on small and medium sterilizers.
Operator Troubleshooting
Operator Troubleshooting Chart
A comprehensive chart listing common sterilizer problems and their probable causes and corrections.
Replacement Parts
Spare Parts List for Series 3011, 3021, 3013, 3023
Lists part numbers and recommended spares for specific sterilizer series.
Spare Parts List for Series 3031, 3041, 3051, 3033, 3043, 3053
Lists part numbers and recommended spares for a different range of sterilizer series.
Associated Publications
List of Associated Publications
Provides a comprehensive list of related publications, including technique manuals and equipment drawings.
Need help?
Do you have a question about the EAGLE SERIES 3023 and is the answer not in the manual?
Questions and answers