Table of Contents
Advertisement
SIMATIC NET
Industrial Ethernet switches
SCALANCE XR-500
Operating Instructions
05/2017
A5E03275845-11
___________________
Introduction
___________________
Safety notes
___________________
Description of the device
___________________
Assembling
___________________
Connecting
___________________
Uninstalling
___________________
Upkeep and maintenance
Technical data
___________________
Dimension drawings
___________________
Certification
1
2
3
4
5
6
7
8
9
10
Advertisement
Table of Contents
Related Manuals for Siemens SCALANCE XR526-8C
Summarization of Contents
Introduction
Purpose of the Operating Instructions
Explains the manual's scope and intended use for the SCALANCE XR-500 product line.
Validity of the Operating Instructions
Lists the specific devices covered by these operating instructions.
Documentation on configuration
Points to external manuals for configuration details.
Safety notes
Read the safety notices
Advises users to note and read all safety notices for device operation.
General notices
Provides critical warnings and guidelines for device usage and placement.
Safety notices when using the device according to Hazardous Locations (HazLoc)
Specific safety notices for operation in hazardous locations.
Security recommendations
Details general, physical, and software security measures for the device.
Secure/non-secure protocols and services
Guidelines for using secure communication protocols and disabling insecure ones.
Interfaces security
Measures to secure device interfaces and ports.
Description of the device
Product overview
Details the SCALANCE XR-500 product line's type designations and article numbers.
Permitted ambient temperature
Specifies maximum ambient temperatures for different device models and conditions.
Accessories
Introduces available accessories for the SCALANCE XR-500 product line.
SELECT/SET button
Explains the function, position, and usage of the SELECT/SET button.
LED display
Explains the meaning and status indications of various LEDs on the device.
C-PLUG / KEY-PLUG
Explains the purpose and use of the C-PLUG/KEY-PLUG for configuration and licensing.
Combo ports
Describes the characteristics and configuration modes of combo ports.
Assembling
Safety notices for installation
Crucial safety warnings related to device installation and environmental conditions.
Types of installation
Outlines the options for physically mounting the IE switches and modular components.
Desktop operation with adhesive feet
Provides important notes and warnings for desktop installation.
Four-point mounting
Explains when four-point mounting is necessary and provides notes on its application.
Plugging and pulling MM900 media modules
Important notices regarding the use and handling of media modules.
Inserting and removing pluggable transceivers (SFP/SFP+)
Critical notes and warnings about using approved SFP/SFP+ transceivers.
Mounting power supply units
Instructions for mounting power supply units, including rack and rear panel options.
Connecting
Commissioning
Guidelines and warnings for commissioning devices and replacement devices in a network.
24 VDC power supply
Notes and warnings regarding overvoltage protection and SELV for 24 VDC power.
100 to 240 VAC power supply
Details power supply information for specific models, including safety warnings.
Signaling contact
Explains the signaling contact's function and connection.
Serial interface
Details how to use the serial interface for device access and connection.
Out-of-band interface
Describes the out-of-band interface and its use for direct IP access.
Block architecture of the XR552-12M
Explains the internal data transfer architecture of the XR552-12M.
Uninstalling
Uninstalling the device
Step-by-step instructions for safely uninstalling the device and its components.
Upkeep and maintenance
Changing the fan unit
Procedure for replacing the fan unit on specific SCALANCE XR models.
Changing the filter pad
Procedure for replacing the filter pad on specific SCALANCE XR models.
Downloading new firmware using TFTP without WBM and CLI
Step-by-step guide for firmware download using TFTP.
Restoring the factory settings
Instructions for resetting the device to factory defaults during startup or operation.
Technical data
Technical specifications of the SCALANCE XR524-8C
Detailed technical specifications for the SCALANCE XR524-8C model.
Technical specifications of the SCALANCE XR526-8C
Detailed technical specifications for the SCALANCE XR526-8C model.
Technical specifications of the SCALANCE XR528-6M
Detailed technical specifications for the SCALANCE XR528-6M model.
Technical specifications of the SCALANCE XR552-12M
Detailed technical specifications for the SCALANCE XR552-12M model.
Switching properties
Details switching properties like MAC addresses, aging time, latency, and frame switching.
Dimension drawings
SCALANCE XR524-8C and SCALANCE XR526-8C
Provides dimension drawings for the XR524-8C and XR526-8C models.
SCALANCE XR528-6M
Provides dimension drawings for the SCALANCE XR528-6M model.
SCALANCE XR552-12M
Provides dimension drawings for the SCALANCE XR552-12M model.
Mounting brackets for use on ships
Introduction and design drawings for special mounting brackets for ship use.
Certification
EC declaration of conformity
States compliance with EU directives and harmonized standards.
EMC directive (electromagnetic compatibility)
Details compliance with EMC directives and relevant standards.
Safety of electrical equipment
Conforms to European directive EN 60950-1 for electrical safety.
Low voltage equipment directive
Compliance with the Low Voltage Equipment Directive for AC powered devices.
ATEX (explosion protection directive)
Information and warnings for use in hazardous ATEX zones.
ATEX classification
Specifies ATEX classification and relevant standards.
IECEx
Details IECEx classification and relevant standards for explosion protection.
FM
Product compliance with Factory Mutual Approval standards and hazardous location requirements.
cULus approval for industrial control equipment
cULus certification for industrial control equipment.
cULus Approval for Information Technology Equipment
cULus certification for information technology equipment.
cULus Approval Hazardous Location
cULus certification for hazardous location equipment.
RCM
Compliance with AS/NZS 2064 standard.
Marking for the customs union EAC
Information on Eurasian Conformity marking.
FDA and IEC marks
Lists devices meeting FDA and IEC requirements.
Mechanical stability (in operation)
Details mechanical stability test results according to vibration and shock standards.
Need help?
Do you have a question about the SCALANCE XR526-8C and is the answer not in the manual?
Questions and answers