Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Snorkel MB20J
Summarization of Contents
Safety Rules and Usage Guidelines
General Safety Hazards
Covers electrocution, tip over, collision, and fall hazards associated with the machine's operation.
Platform Usage Limitations
Defines the machine's purpose, prohibited uses, and critical load limits for safe operation.
Environmental Temperature Limitation
Specifies the acceptable operating temperature range for the aerial work platform.
Introduction to the Manual
Purpose, Scope, and Warnings
Describes the manual's purpose, scope, and explains the warning symbols used throughout the document.
General Machine Description
Provides an overview of the MB20/26J aerial work platforms, their capabilities, and intended use.
Platform and Control Systems
Platform Features and Safety
Details the platform's construction, handrails, safety restraint points, and entrance.
Platform Controller Operations
Explains the functions and operation of the upper and lower control boxes.
Elevating Assembly Mechanism
Describes the mast and jib lifting system, including hydraulic cylinders and chains.
Machine Systems and Workshop Procedures
Rotation, Drive, and Power Systems
Covers mast rotation, electronic drive/steer systems, and the hydraulic power system.
Workshop Procedures Disclaimer
States the manual's limitations regarding detailed workshop procedures and safety.
Operation and Specification Basics
Special Limitations and Manual Force
Covers operational limits, including manual force restrictions per occupant.
Platform Capacity and Wind Limits
Details platform load capacity and specifies wind speed limits using the Beaufort scale.
General Description and Safety Overview
Machine Overview and Key Safety Warnings
Provides a general machine overview and highlights critical safety warnings.
Safety Inspection Procedures
Daily Safety Inspection Overview
Details the daily safety checks required before operating the machine.
Battery Maintenance and Filling
Explains how to check and fill battery cells with distilled water.
Control Panel and Mast Chain Checks
Lower Control Panel Checks
Details checks related to the lower control panel, emergency stops, and functions.
Mast Chain Adjustment Procedures
Explains how to adjust mast chains for proper load distribution and operation.
System Checks and Travel Operations
System Checks and Travel Procedures
Covers mast straps, rotation, tilt sensor checks, and machine travel operations.
Platform Control Operation
Final Preparation and Control Box Overview
Describes final preparation steps and provides an overview of the platform control boxes.
Upper Control Panel Details
Joystick and Deadman Grip Functions
Explains the primary joystick functionality and the integrated deadman grip safety feature.
Emergency Stop and Selector Switches
Details the operation of the emergency stop button and various selector switches.
Lower Control Panel Details
Key Switch and Rocker Switch Operations
Explains the key switch functions and the operation of the rocker switch for movement.
Selector and Enable Switches
Describes the function of selector switches and the enable switch for operation.
Typical Operation Procedures
Raising the Mast
Step-by-step guide on how to safely raise the mast assembly.
Elevating and Lowering Platform
Pre-operation checks and procedures for elevating and lowering the work platform.
Travel Operations
Traveling with Platform Lowered
Instructions for driving the machine with the platform in the lowered position.
Traveling with Platform Elevated
Guidelines for driving the machine with the platform in the elevated position.
Emergency Procedures
Emergency Stop and Situations
Actions for emergency situations and response to tilt sensor activation.
Manual Lowering and Rotation
Steps for manually lowering the platform and rotating the mast assembly.
Transportation - Forklift and Weights
Machine Weights and Ballast Information
Details the weight of different machine versions and ballast removal procedures.
Forklift Transportation Guidelines
Instructions for safely lifting and transporting the machine using a forklift.
Transportation - Crane Lifting
Crane Lifting Procedures
Guidelines for safely lifting the machine with an overhead hoist or crane.
Transportation - Truck and Towing
Securing for Truck Transport
Instructions for properly securing the machine on a transport vehicle or trailer.
Towing and Winching Valve Operation
Explains how to operate towing and winching valves to bypass brakes.
After Daily Use and Charging
Daily Procedures and Battery Charging
Steps to follow after daily use and instructions for charging the machine's batteries.
Long-Term Storage and Battery Handling
Long-Term Storage and Preservation
Guidance for preserving the machine during extended periods of storage.
Battery Disconnect and Safety
Instructions for disconnecting batteries and safety precautions for handling.
Daily Preventative Maintenance
Maintenance Checklist and Reporting
Details the daily preventative maintenance checklist and reporting requirements.
Specifications - MB20J
MB20J Model Technical Specifications
Provides detailed technical specifications for the MB20J model.
Specifications - MB26J
MB26J Model Technical Specifications
Provides detailed technical specifications for the MB26J model.
Need help?
Do you have a question about the MB20J and is the answer not in the manual?
Questions and answers