Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Snorkel ML15I
Summary of Contents for Snorkel ML15I
- Page 1 OPERATOR’S MANUAL Part Number 7030242 October 2019 Replaces August 2019...
- Page 2 The material lift is not electrically insulated. Death or serious injury will result from contact with, or inadequate clearance from, an energized conductor. Do not go closer than the minimum safe approach distance as defined by the Minimum Safe Approach Distance section in Chapter 3–Safety. Regard all conductors as energized.
-
Page 3: Table Of Contents
Before Operation ............6 After Use..............15 During Operation ............6 Placards and Decals...........7 Chapter 6 – Transporting Decals – ANSI ............8 Transporting .............17 Material lifts equipped with stabilizers ....17 Limited Warranty ML5I • ML10I • ML15I • ML20I • ML25I – 7030242... -
Page 5: Chapter 1 - Introduction
Every person who maintains, inspects, tests, or repairs the material lift must be qualified to do so. Following the daily prestart inspection in this Operator’s Manual will help keep the material lift in optimum working condition. ML5I • ML10I • ML15I • ML20I • ML25I – 7030242... -
Page 6: Additional Information
Additional Information For additional information contact your local dealer or Snorkel at: Snorkel International P.O. Box 1160 St. Joseph, MO 64502-1160 USA 1-800-255-0317 http://www.snorkellifts.com ML5I • ML10I • ML15I • ML20I • ML25I – 7030242... -
Page 7: Chapter 2 - Specifications
Chapter 2 – Specifications Component Identification Mast Sections Forks Shown in Up/Inverted Position Legs Carriage Two-speed Winch Smart-Set Adjustment System Loading Wheels Carriage Hold-down Bar Casters ML5I • ML10I • ML15I • ML20I • ML25I – 7030242... -
Page 8: Specifications
106 kg 122 kg 150 kg 167 kg Winch Cranks/Distance Fast Speed 4 cranks/ft 13.1 cranks/m Slow Speed 15 cranks/ft 49.2 cranks/m Specifications are subject to change without notice. ML5I • ML10I • ML15I • ML20I • ML25I – 7030242... -
Page 9: Chapter 3 - Safety
ANSI. ance around the machine before moving the machine, mast or load. Allow sufficient room and time to stop movement to avoid contact with structures or other hazards. ML5I • ML10I • ML15I • ML20I • ML25I – 7030242... -
Page 10: Before Operation
NEVER operate a material lift if any damage to the winch or cable is observed or suspected. ML5I • ML10I • ML15I • ML20I • ML25I – 7030242... -
Page 11: Placards And Decals
Do not operate the aerial platform if any placards or decals are missing, damaged, or illegible. The location, description, quantity, and part number of the material lift placards and decals are illustrated on the following pages. ML5I • ML10I • ML15I • ML20I • ML25I – 7030242... -
Page 12: Decals - Ansi
Serial Plate, Material Lifts Optional Equipment Part Number Description SM00902A Warning Adjustable Fork Safety – Adjustable Forks Only SM00903A Notice Boom Set Up SM00904A Warning Boom Safety SM00906A Warning Bodily Injury Hazard ML5I • ML10I • ML15I • ML20I • ML25I – 7030242... - Page 13 S7030241 or SM00904A SM00909A SM00902A SM00910A SM00908A SM00912A SM00902A 7030140 or 7030254 7030243 7030243 SM00910A SM00910A SM00906A SM00911A SM00905A SM00918A SM00922A SM00910A SM00901A 7030184 or 7030184 SM00966A 7030244 7030244 ML5I • ML10I • ML15I • ML20I • ML25I – 7030242...
- Page 14 Chapter 3 – Safety ML5I • ML10I • ML15I • ML20I • ML25I – 7030242...
-
Page 15: Chapter 4 - Prestart Inspection
8. Place the desired load lifting attachment (standard Verify that the cable is wrapped around the winch forks, adjustable forks, boom) inside the carriage. drum at least four times when the carriage is lowered. ML5I • ML10I • ML15I • ML20I • ML25I – 7030242... -
Page 16: Material Lifts Equipped With Adjustable Forks
4. Replace any missing, damaged, or illegible placards or decals before operating the aerial platform. Placard and decal kits are available from Snorkel. ML5I • ML10I • ML15I • ML20I • ML25I – 7030242... -
Page 17: Chapter 5 - Operation
During operation: Follow all of the safety rules provided in previous sections of this manual. Follow all instructions provided in this section. ML5I • ML10I • ML15I • ML20I • ML25I – 7030242... -
Page 18: Material Lifts Equipped With Adjustable Forks
2. Refer to the chart below to determine if the material lift can lift the desired weight. 5. Secure the load to the load lifting attachment. ML5I • ML10I • ML15I • ML20I • ML25I – 7030242... -
Page 19: Two-Speed Shift
7. After lowering the load to the desired position, rotate the winch handles one quarter-turn toward the mast, as if raising the carriage, to set the brake. ML5I • ML10I • ML15I • ML20I • ML25I – 7030242... - Page 20 Chapter 5 – Operation ML5I • ML10I • ML15I • ML20I • ML25I – 7030242...
-
Page 21: Chapter 6 - Transporting
Reverse the loading instructions to unload the material lift. 5. Adjust the loading wheel to the height of the truck or trailer bed using the Smart-Set adjustment system; no pin is needed. ML5I • ML10I • ML15I • ML20I • ML25I – 7030242... - Page 22 Chapter 6 – Transporting ML5I • ML10I • ML15I • ML20I • ML25I – 7030242...
- Page 23 All parts returning should be still in a factory state, free of any alteration to the original design. If the parts are subject to repair it will need to be pre authorized by the Snorkel Product Sup- port Group and or Warranty Department prior to the repair being completed.
- Page 24 10. Reimbursement policy, labor will be paid at 75% of posted hourly shop rate. Travel time will be paid at $50 per hour up to a maximum of 3 hours. Snorkel will pay 1 hour of troubleshooting time per warranty claim, unless expressly agreed otherwise in writing and in advance by Snorkel’s Warranty Department.
- Page 25 Snorkel will not cover leaks from fittings, hoses and any other connection points after the unit has been in service for 90 days or 150 hours of operation which ever comes first.
-
Page 26: Limited Warranty
Distributor/SSC/Dealer. Warranty support should be from the Distributor/SSC/Dealer from whom the Snorkel product was purchased. Where Snorkel equipment is supplied directly from the factory the end customer, or if unable to contact the Distributor/SSC/Dealer, may contact the Snorkel Warranty Department for further assistance. - Page 28 Local Distributor / Lokaler Vertiebshändler / Distributeur local El Distribuidor local / ll Distributore locale EUROPE, MIDDLE EAST AFRICA & ASIA PHONE: +44 (0) 845 1550 058 FAX: +44 (0) 845 1557 756 NORTH & SOUTH AMERICA PHONE: +1 785 989 3000 TOLL FREE: +1 800 255 0317 FAX: +1 785 989 3070 AUSTRALIA...
Need help?
Do you have a question about the ML15I and is the answer not in the manual?
Questions and answers