McAfee DR SOLOMON S ANTI-VIRUS 8.5 User Manual page 171

Method 3: Use the WinGuard Properties dialog box
Follow these steps:
1. Right-click the WinGuard icon
the WinGuard shortcut menu.
2. Point to Properties, then choose a module name to open the WinGuard
Properties dialog box
Figure 4-45. WinGuard Properties dialog box
3. For each module that you want to disable, click the corresponding icon
along the left side of the dialog box, then click the Detection tab.
4. Clear the Enable checkbox at the top of each module page.
As you do so, the scanner will disable that module and make all of the
configuration options in that page unavailable. Depending on which
modules you disable, the WinGuard icon will display a different state.
If you disable all of its modules, the scanner will display
Windows system tray, unless you clear the Show icon in the taskbar
checkbox in the System Scan Detection property page. In that case,
WinGuard will not display an icon in the system tray.
Using this method to disable the module makes the disabled state the
module's "default" state. If you later use the shortcut menu to enable the
module, it will stay enabled only until you restart your Dr Solomon's
Anti-Virus or your computer.
in the Windows system tray to display
(Figure 4-45).
Using the WinGuard Scanner
in the
User's Guide 171