Figure 4-1. System Scan Status dialog box
2. For each module that you want to enable, click the corresponding tab,
then click Enable. The same button in the property page for active
modules will read Disable.
3. Click Close to close the dialog box.
Depending on which combination of modules you enable, the WinGuard icon
will display a different state.
Method 3: Use the WinGuard Properties dialog box
Follow these steps:
1. Right-click the WinGuard icon
the WinGuard shortcut menu, point to Properties, then choose System
Scan to open the WinGuard Properties dialog box.
Using the WinGuard Scanner
in the Windows system tray to display
User's Guide
101