Working With The Vshield Task - McAfee DR SOLOMON S ANTI-VIRUS 8.5 User Manual

Working with the VShield task

The VShield task appears in the Console window primarily so that you can
manage its operation. You can enable and disable it directly from the Console
window, or double-click the task to open the Task Properties dialog box
(Figure
In this dialog box, you can:
• Enable or disable the task. Click the Disable button at the bottom of the
Task Properties dialog box. If the scanner is inactive, this button will read
Enable.
• Open the VShield configuration property pages. Click Configure to open
the System Scan dialog box, where you can choose all of the configuration
options available for the VShield scanner. To learn how to configure the
scanner, see
• View statistics for VShield modules. Each of the other property pages in
the Task Properties dialog box shows summary statistics for the last scan
session each ran. Click any other tab to see these statistics. To learn how to
display a real-time update for these statistics, see
software status information" on page
6-3).
Figure 6-3. VShield scanner Task Properties dialog box
"Setting WinGuard scanner properties" on page
Creating and Configuring Scheduled Tasks
"Tracking WinGuard
172.
109.
User's Guide 217