Cowon D2DAB - VERSION 1.2 User Manual page 25

Troubleshooting
25
Characters on the display are corrupted.
Reset the language using Settings-Display-Language menu and set display format to File
name using Settings-Display-Title menu. If the problem continues, reset the player follow-
ing the procedures outlined in the manual. Some special fonts may not display perfectly.
Computer cannot recognize the player when connected.
If D2 doesn't' power on when connected PC, press RESET button next to the USB jack on
the bottom of the player.
D2 may require additional driver installation for Windows 98 users.
Connection to an external USB Hub may not be stable due to its low power. D2 should be
connected directly to a PC's USB port.
Player is not recognized by COWON MediaCenter - JetAudio and
"No iAUDIO found" message appears.
Check to see if the player is recognized in Windows Explorer when it is properly connected
to PC. D2 must be recognized in the Windows for it to work with COWON MediaCenter -
JetAudio.
Additional driver installation is required for Windows 98 and 98 SE users.
Within COWON MediaCenter - JetAudio, set Settings-Device to match your model.
Memory capacity of the player is different or smaller than specified.
The memory capacity indicated by Windows Explorer may be different from that indicated
by the memory manufacturer.
D2 uses some area in the drive for system operation. Therefore, the actual available
capacity is somewhat reduced after excluding system area.
COWON D2 does not play properly when memory is full.
For D2 to function properly, it requires at least 5 MB of space for saving settings and other
system files.
COWON D2 DAB