Cowon D2DAB - VERSION 1.2 User Manual page 19

4. Timer
1. Time Setup
· Sets the current time.
· Sets the correct time setting for alarm and scheduled recording.
2. Wakeup mode
· Automatically turns on the player at the specified wakeup time.
· Music Alarm plays music and for FM Alarm settings, the last station to be listened to will
run in Radio mode.
· For FM recording, it records the last radio frequency from the preset time during the
specified time.
NOTE: FM Scheduled Recording uses more power than other features. Always make
sure that the player is fully charged before using this feature.
3. Wakeup Time
· Sets the time to automatically turn the player on.
· Once sets the alarm for one time use, Daily sets the alarm for daily use.
· Duration is the period of time during which the alarm will stay on.
4. Sleep
· Automatically turns off the power after a specified time.
· After the preset time has passed, the player will automatically turn off even if a file is
being played at the time.
5. Auto Off
· When the player is stopped and no action is taken after a specified time has elapsed,
this feature will automatically turn off the player.
· This function does not operate during playback.
5. General
1. Skip length
· Sets the length of playback time skipped when the
2. Scan speed
· Sets the speed of Fast Forward/Rewind when the
· The faster the speed, the quicker scanning is possible.
3. Resume
· Saves the location of the music file played at the last power off.
· If enabled, when the player is turned on, it automatically plays from the last position where
it was turned off.
4. Fade in
· Gradually increases volume when resuming playback after stop or pause.
· Sets how long it takes to increase the volume.
5. Load Default
·Sets all the settings to default values except for the language
6. User defined button
·User can define a desired function for Pressing and holding
Basic Operations
buttons are pressed shortly.
buttons are pressed and held.
button
19
COWON D2 DAB