Sony UP-DR200 Operating Instructions Manual page 20

Note
The gray balance of images cannot be adjusted during
printing.
3
1
Press the CAL button.
The printer is switched to off-line.
2
Press the F and f buttons to select GRAY PATCH
PRINT.
F f
Press and to display GRAY PATCH PRINT.
3
Press the EXEC button.
The printer returns to the on-line mode and starts
printing.
When using the 2UPC-R203 series or 2UPC-R204
series, gray adjustment patterns Group A and
Group B are printed on two sheets separately.
When using the 2UPC-R205 series or 2UPC-R206
series, gray patterns Group A and Group B are
printed on one sheet.
4
Look at the printout of Group A, and determine the
best gray balance from pattern numbers 0 to 88.
5
Look at the printout of Group B, and determine the
best gray balance from pattern numbers 0 to 88.
6
Press the CAL button.
The printer is switched to off-line.
20
Menu Operations
2,7,8,9,10
1,6,11
7
Press the F and f buttons to select GRAY ADJUST
[A].
The printer enters the gray balance adjustment
mode.
F f
Press and to display GRAY
ADJUST [A].
8
Press the G and g buttons to display the pattern
number determined in step 4.
For example, select 18 if you determined that
pattern No. 18 in the sample provides the best color
tone of the gray balance.
G g
Press and to display 18.
9
Press the F and f buttons to select GRAY ADJUST
[B].
The printer enters the gray balance adjustment
mode.
F f
Press and to display GRAY
ADJUST [B].
10
Press the G and g buttons to display the pattern
number determined in step 5.
For example, select 39 if you determined that
pattern No. 39 in the sample provides the best gray
balance.
G g
Press and to display 39.
11
Press the CAL button.
The printer returns to the on-line mode.