Host View Printer Installation; Allowing The Print Spooler To Access Client Connections; Allowing A Remote Administration Exception - Kyocera FS-1035MFP/DP User Manual

2
3
4
5

Host View Printer Installation

Allowing the Print Spooler to Access Client Connections

1
2
3
4
5

Allowing a Remote Administration Exception

1
2
3
4
KMnet Viewer 5.3
Right-click on the queue and select Rename.
Type the new name in the box.
Click Edit.
When renaming is finished, click Finish.
The printer driver software provides settings to customize output from your
printing system. You can remotely install printer drivers onto a host computer.
Once installed, drivers can be upgraded or uninstalled.
The administrator can set policies that are applied to the computer for any user
who logs on. The Allow Print Spooler to accept client connections policy
manages access to the print spooler.
In the Local Group Policy Editor, click Computer Configuration >
Administrative Templates > Printers.
From the Setting list, double-click the Allow Print Spooler to accept client
connections policy.
Select Enabled so the print spooler will always accept client connections.
Click OK.
Restart the print spooler for changes to this policy to take effect.
The administrator can set policies that are applied to the computer for any user
who logs on. The Allow inbound remote administration exception policy
manages exceptions to accessing remote connections when the firewall is on.
This feature allows remote administration of the computer using Windows
Management Instrumentation (WMI).
In the Local Group Policy Editor, click Computer Configuration >
Administrative Templates > Network > Network Connections > Windows
Firewall.
If the computer is on the domain, double-click Domain Profile. If the computer
is not on the domain, double-click Standard Profile.
Double-click Windows Firewall: Allow inbound remote administration
exception.
Select Enabled to allow remote administration for the computer.
Host
5-3