Adding A Document Box; Exporting A Document Box List - Kyocera FS-1035MFP/DP User Manual

Adding a Document Box

1
2
3
4
5
6
7
8

Exporting a Document Box List

1
2
3
4
KMnet Viewer 5.3
Password change
You can set or change your password for the box, if desired.
Overwrite setting
Select to permit a new document to replace an existing document with the
same name.
Sub address
Type the subaddress. Available with FAX boxes.
Delete after printed
Select this option to permanently remove a document from the box after it is
printed.
You can create a new document box on the hard disk. A maximum of 1000
document boxes is supported.
Select a device.
Select Device > Document box.
Click on the Add box icon.
Specify the Name for the new box.
The default box type is Custom box. Some devices also support a FAX box for
receiving faxes.
Specify the password if you want to create a password-protected document
box.
Specify values or use the default values for the other settings.
Click OK to add the new box.
You can delete a document box by selecting it from the list and clicking Delete
box.
You can save the document box list to your computer or network. Once saved, it
can be imported into a printer driver.
Select a device.
Select Device > Document box.
In the Document Box dialog box, select a box from the list.
Click Export.
Device
3-13