Connections; Cable Indications - Denon DRA-37 Operating Instructions Manual

ENGLISH
Getting Started
Power buttons················(20)
Number buttons
(0 ~ 9, +10) ··········(12, 14, 17)
BAND button ··················(12)
Memory block
buttons (A ~ G)···············(12)
Input source selector
buttons ····························(10)
NOTE:
• If buttons on the front or rear are pressed strongly, the button on the opposite side will be activated
too.
[ Rear ]
MODE button············(12, 16)
MEMORY button ············(12)
TUNING buttons ············(12)

Connections

Cable indications

The hookup diagrams on the subsequent pages assume the use of the following optional connection
cables (not supplied).
Audio cable
A
Analog connections (Stereo)
(White)
L
R
(Red)
Pin-plug cable
B
Analog connections (Monaural, for subwoofer)
Pin-plug cable
C
Speaker connections
Speaker cable
D
Video connections
(Yellow)
Video cable (75 Ω/ohms video pin-plug cable)
NOTE:
• Do not plug in the power supply cord until all connections have been completed.
• When making connections, also refer to the operating instructions of the other components.
• Be sure to connect the left and right channels properly (left with left, right with right).
• Do not bundle power cords together with speaker cables. Doing so could result in humming or noise.
5
ENGLISH
Signal direction
Audio signal
L
IN OUT OUT
R
Video signal
IN OUT OUT
IN
IN