Setting The Punch Through Function; Operating A Component Stored In The Preset Memory - Denon DRA-37 Operating Instructions Manual

Operating the remote control unit

Setting the punch through function

"Punch Through" is a function allowing you to operate
6 , 7 , 8 and 9 on CD, DVD/VDP, TAPE/CD-R/MD or VCR
components when in the TV or DBS/CABLE mode. By default, nothing
is set.
1
[MODE SELECTOR 1]
Set to "A".
2
[MODE SELECTOR 2]
Set to the component to be
registered (TV or DBS/CABLE).
3
[A] [D]
Press and at the same time.
• The indicator starts flashing.
4
Input the number of the component you want to set.
CD
DVD/VDP
TAPE/CD-R/MD
VCR
No setting
Operating a component stored in the preset
memory
, , , ,
1 2 0 3
1
[MODE SELECTOR 1]
Set
Set to the A side for the CD/iPod, TV, DBS/CABLE or DVD
position, and to the B side for the CD-R/TAPE or VCR position.
2
[MODE SELECTOR 2]
Set
to operate.
3
Operate the component.
For details, refer to the component's operating instructions.
Some models cannot be operated with this remote control unit.
No.
1
2
3
4
0
to "A" or "B".
to the component you want
18
ENGLISH
ENGLISH
Operating the remote control unit