Related Manuals for Whyte 809
Summarization of Contents
Bike Geometry
Whyte 19 Trail, Ti & Steel Geometry
Geometry specifications for Whyte 19 Trail Alloy, Titanium, and Steel models.
Whyte 19 C, CS, Race & Works Geometry
Geometry details for Whyte 19 C, CS, Race, and Works models.
Whyte 801, 805 & 809 Geometry
Geometry specifications for Whyte 801, 805, and 809 models.
Whyte 901 & 905 Geometry
Geometry data for Whyte 901 and 905 models.
Preparations for Riding
Making Adjustments
Guidance on making adjustments to Whyte bike components using manufacturer data.
Getta-Grip Seat Clamp Setup
Instructions for setting up the Getta-Grip seat clamp, bolt-up and QR styles.
Front Fork Setup
Procedure for adjusting fork sag and rebound damping for optimal performance.
Whyte 19 Trail Adjustable Dropout System
Explanation of the Whyte 19 Trail adjustable dropout system.
Adjusting Whyte 19 Trail Dropout System
Detailed steps for adjusting chain stay length using the dropout system.
Safety Information
General Safety Notes
Advisory notes on the safe use and operation of your Whyte bike.
Maximum Rider Weight Limit
Specifies the maximum rider weight limit for Whyte Hardtail MTB Series.
Component Wear and Failure
Warning about component wear, stress fatigue, and potential failure.
Designed Use and Compliance
Information on intended use and compliance with BS EN 14766 Standard.
Lubrication
Getta-Grip Seat Clamp Lubrication
Lubrication points and intervals for Getta-Grip seat clamps.
Whyte 19 Trail Dropout System Lubrication
Lubrication details for the Whyte 19 Trail adjustable dropout system.
General Hardtail MTB Lubrication
General lubrication advice for Whyte hardtail mountain bikes.
Torque Settings
Whyte 19 Dropout System Torque
Torque specifications for Whyte 19 Dropout System components.
M6 Clamping Screws Torque
Torque values for M6 x 16mm clamping screws.
Need help?
Do you have a question about the 809 and is the answer not in the manual?
Questions and answers