Related Manuals for Christie MIRAGE HD14K-J
Summarization of Contents
1 Introduction
1.1 Projector Overview
Overview of Mirage J Series projectors, their capabilities, and applications in simulation and VR.
2 Operation
2.1 3D
Details the projector's ability to display stereoscopic 3D video sources and the underlying technology.
2.1.1 Requirements
Lists essential hardware, software, and source material for successful stereo 3D operation.
Connecting the 3D Stereo Sync Cable
Guides the connection of the GPIO cable for synchronizing 3D components like emitters and projectors.
2.1.2 Active and Passive Stereo 3D Configurations
Illustrates typical hardware setups for both active and passive stereo 3D display systems.
4.2 3D Settings
Explains how to use the 3D Settings menu for timing adjustments and realistic simulation.
2.1.3 Example of 3D Multiple Display Setup
Provides step-by-step instructions for configuring multiple projectors for a 3D display.
Appendix A: Menu Tree
A.1 Mirage J Series Menu Tree
A visual diagram outlining the projector's complete menu structure and available options.
Appendix B: GPIO
B.1 GPIO Port
Describes the 9-pin D-Sub GPIO connector and its available pins for external interfacing.
Configuring the GPIO
Explains how to configure GPIO pins for input/output and control states using serial commands.
Need help?
Do you have a question about the MIRAGE HD14K-J and is the answer not in the manual?
Questions and answers